User's Manual

2120

Alternate Setup Method

2120

Alternate Setup Method

Step

Set your computer’s network

settings to work with a DHCP server

The “Internet/WAN” tab is where you will set up your Router to

connect to your Internet Service Provider (ISP). The Router is capable

of connecting to virtually any ISP’s system provided you have

correctly configured the Router’s settings for your ISP’s connection

type. Your ISP connection settings are provided to you by your ISP.

To configure the Router with the settings that your ISP gave you,

click “Connection Type”

(1) on the left side of the screen. Select the

connection type you use. If your ISP gave you DNS settings, clicking

“DNS” (2) allows you to enter DNS address entries for ISPs that

require specific settings. Clicking “MAC address” (3) will let you clone

your computer’s MAC address or type in a specific WAN MAC address

if required by your ISP. When you have finished making settings, the

“Internet Status” indicator will read “connection OK” if your Router is

set up properly.

(1)

(2)

(3)