User's Manual

2524
Alternate Setup Method
2524
Alternate Setup Method
Setting your ISP Connection Type to (PPPoE)
Most DSL providers use PPPoE as the connection type. If you use a
DSL modem to connect to the Internet, your ISP may use PPPoE to
log you into the service. If you have an Internet connection in your
home or small office that doesn’t require a modem, you may also
use PPPoE.
Your connection type is PPPoE if:
1) Your ISP gave you a user name and password which is
required to connect to the Internet;
2) Your ISP gave you software such as WinPOET, Enternet300
that you use to connect to the Internet; or,
3) You must double-click on a desktop icon other than your
browser to get on the Internet.
To set the Router to use PPPoE, type in your user name and password
in the spaces provided. If you do not have a service name or do not
know it, leave the “Service Name” field blank. After you have typed
in your information, click “Apply Changes” (6). After you apply the
changes, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(1) User Name
This space is provided to type in your user name that was assigned
by your ISP.
(1)
(6)
(2)
(3)
(4)
(5)