User Manual

13
Windows 98, Me, 2000
The Card is equipped with a management utility that allows you to change
the settings of the wireless Card, see the wireless signal strength, turn the
Card’s radio on or off, and much more. The Card also puts an indicator icon
in the bottom right-hand corner of your computer (the system tray) that
gives you a quick look at your wireless signal quality.
Green or : Excellent signal quality
Yellow or : Fair signal quality
Red or : Poor to no signal quality
To Open the Wireless Manager Utility Screen
To access the management utility, double-click on the icon (Windows
98, Me, 2000) or (Windows XP) in the bottom right-hand corner of
your computer screen. The “Belkin Wireless LAN Utility” window will
open. You will see the “Link Status” tab. There are four tabs that
perform different functions.
wireless networking
wireless networking
12
5. The “Wireless Network Connection Properties” window will appear. Click
on the tab labeled “Wireless Networks”.
6. Remove the check mark next to “Use Windows to configure my wireless
network settings”.
7. Click “OK”.
8. Windows XP is now configured to let the Belkin software control the
Card. Follow the directions in the next section titled “Windows 98, Me,
2000” to operate the Card.