User's Manual
Table Of Contents
- Introduction
- Hardware Setup
- Indicator LEDs
- Connecting Devices
- 1. Connecting Computers with Wires: Connect computers directly to the Gateway on ports 1-4 on the...
- 2. Connecting Wireless Computers: Simply make sure your wireless computers are within range of th...
- 3. Connecting a Cable Modem or DSL Modem: Connect your Cable or DSL modem to the WAN port on the ...
- 4. Power: Plug the power adapter into the power jack (9 V/1000 mA).
- 5. Reset Button: The Reset Button is designed and positioned at rear panel for rebooting and rese...
- Configuring Wireless Connections
- Configuring Your Computer
- Configuring Your Computer with Windows 95/98/Me
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop, click the “Start” button. Choose “Settings,” then click “Control Pan...
- 2. From “Control Panel” Double-click the “Network” icon.
- 3. In the “Network” window, under the “Configuration” tab, double-click the “TCP/ IP” component t...
- 4. Select the “IP Address” tab. If “Obtain an IP address automatically” is already selected, your...
- 5. Locate your IP address and Subnet Mask. Record them in the spaces below.
- 6. Click the “Gateway” tab and record the numbers listed under “Installed gateways.”
- 7. Click the “DNS Configuration” tab. Locate the DNS servers listed under “DNS Server Search Orde...
- 8. After writing down your settings, check to make sure you have recorded them correctly. Click t...
- 9. Windows may need your Windows 95/98/Me CD to copy some files. After it finishes copying, it wi...
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the “Stop” button. Click “Tools,” then select “Internet Optio...
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows 2000
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop, click the “Start” button. Choose “Settings,” then click “Control Pan...
- 2. Double-click the “Network & Dial-Up Connections” icon.
- 3. Double-click the icon that corresponds to the connection to your F5D6231-4 Wireless Gateway.
- 4. Click “Properties.” After then, double-click “Internet Protocol (TCP/IP).”
- 5. All information you need to record is on the “Internet Protocol (TCP/IP) Properties” dialog bo...
- 6. Select “Obtain an IP address automatically” and then select “Obtain DNS server address automat...
- 7. Click “OK” or “Close” to close each window.
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the stop button. Click “Tools,” then “Internet Options.”
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- 1. From the Windows desktop, click the “Start” button, then “Programs,” then “Accessories,” and t...
- 2. In the “Command Prompt” window, type “IPCONFIG /RELEASE” and press the
key. - 3. Type “IPCONFIG/RENEW” and press the
key. Verify that your IP address is now 192.168.2.... - 4. Type “EXIT” and press
to close the “Command Prompt” window.
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows NT 4.0
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop click “Start,” then “Settings,” and click “Control Panel.”
- 2. Double-click the “Network” icon, then select the “Protocols” tab.
- 3. Double-click “TCP/IP Protocol,” then select the “IP Address” tab.
- 4. In the “Adapter” drop-down list, be sure your Ethernet adapter is selected. If “Obtain an IP a...
- 5. In the “TCP/IP Properties” dialog box, click the “IP address” tab to locate your IP address, s...
- 6. Click the “DNS” tab to see the primary and secondary DNS servers. Record these values in the a...
- 7. After writing down your IP settings, click the “IP address” tab. Select “Obtain IP address aut...
- 8. Click “OK” again to close the “Network” window.
- 9. Windows may copy some files, and will then prompt you to restart your system. Click “Yes” and ...
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the stop button. Click “Tools,” then “Internet Options.”
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- 1. From the Windows desktop, click the “Start” button, then “Programs.” After then, select “Comma...
- 2. In the “Command Prompt” window, type “IPCONFIG/RELEASE” and press the
key. - 3. Type “IPCONFIG /RENEW” and press the
key. Verify that your IP address is now 192.168.2... - 4. Type “EXIT” and press
to close the “Command Prompt” window.
- Step 1. Configure TCP/IP Settings
- Configuring Your Macintosh Computer
- Step 1. Configure TCP/IP Settings
- 1. Pull down the Apple Menu. Click “Control Panels” and select “TCP/IP.”
- 2. In the TCP/IP dialog box, make sure that “Ethernet” is selected in the “Connect via:” field.
- 3. All the information you need to record is in the “TCP/IP” dialog box. Use the space below to r...
- 4. After writing down your IP settings, select “Using DHCP Server” in the “Configure” field and c...
- 5. Another box will appear asking whether you want to save your TCP/IP settings. Click “Save.”
- Step 2. Disable HTTP Proxy
- Step 3. Obtain IP Settings from Your Gateway
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows 95/98/Me
- Configuring Your Gateway
- 1. Open your Web browser (i.e. Internet Explorer or Netscape Navigator) and click the stop button.
- 2. In the “Address” field type “http://192.168.2.1” or “http://192.168.2.1:88” and press
... - 3. On the main page of the Gateway Web console, you will see the Gateway status information as be...
- Configuring LAN
- Configuring Internet/WAN
- Configuring Wireless
- Configuring Firewall
- Configuring Utilities
- 1. Click the “Reset Router” button to reset the configuration.
- 2. To restore the factory default settings, click the "Restore Defaults" button.
- 3. Mostly, Belkin may release new versions of the Router's firmware time to time. Firmware update...
- 4. The F5D6231-4 enters with NO password. For more security, you should add a password here. As y...
- Common Configurations for Popular ISPs
- Specifications
iii
Table of Contents
Introduction 1
Package Contents 1
Confirm That You Meet Installation Requirements 1
Hardware Setup 2
Indicator LEDs 2
Connecting Devices 2
Configuring Wireless Connections 3
Configuring Your Computer 4
Configuring Your Computer with Windows 95/98/Me 4
Step 1. Configure TCP/IP Settings 4
Step 2. Disable HTTP Proxy 5
Internet Explorer 5
Netscape 5
Step 3. Obtain IP Settings from Your Gateway 5
Configuring Your Computer with Windows 2000 6
Step 1. Configure TCP/IP Settings 6
Step 2. Disable HTTP Proxy 7
Internet Explorer 7
Netscape 7
Step 3. Obtain IP Settings from Your Gateway 7
Configuring Your Computer with Windows NT 4.0 8
Step 1. Configure TCP/IP Settings 8
Step 2. Disable HTTP Proxy 9
Internet Explorer 9
Netscape 9
Step 3. Obtain IP Settings from Your Gateway 9
Configuring Your Macintosh Computer 10
Step 1. Configure TCP/IP Settings 10
Step 2. Disable HTTP Proxy 11
Internet Explorer 11
Netscape 11
Step 3. Obtain IP Settings from Your Gateway 11
Configuring Your Gateway 12
Configuring LAN 13
Configuring Internet/WAN 14
Configuring Wireless 16
Configuring Firewall 17
Configuring Utilities 18