User's Manual
Table Of Contents
- Introduction
- Hardware Setup
- Indicator LEDs
- Connecting Devices
- 1. Connecting Computers with Wires: Connect computers directly to the Gateway on ports 1-4 on the...
- 2. Connecting Wireless Computers: Simply make sure your wireless computers are within range of th...
- 3. Connecting a Cable Modem or DSL Modem: Connect your Cable or DSL modem to the WAN port on the ...
- 4. Power: Plug the power adapter into the power jack (9 V/1000 mA).
- 5. Reset Button: The Reset Button is designed and positioned at rear panel for rebooting and rese...
- Configuring Wireless Connections
- Configuring Your Computer
- Configuring Your Computer with Windows 95/98/Me
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop, click the “Start” button. Choose “Settings,” then click “Control Pan...
- 2. From “Control Panel” Double-click the “Network” icon.
- 3. In the “Network” window, under the “Configuration” tab, double-click the “TCP/ IP” component t...
- 4. Select the “IP Address” tab. If “Obtain an IP address automatically” is already selected, your...
- 5. Locate your IP address and Subnet Mask. Record them in the spaces below.
- 6. Click the “Gateway” tab and record the numbers listed under “Installed gateways.”
- 7. Click the “DNS Configuration” tab. Locate the DNS servers listed under “DNS Server Search Orde...
- 8. After writing down your settings, check to make sure you have recorded them correctly. Click t...
- 9. Windows may need your Windows 95/98/Me CD to copy some files. After it finishes copying, it wi...
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the “Stop” button. Click “Tools,” then select “Internet Optio...
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows 2000
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop, click the “Start” button. Choose “Settings,” then click “Control Pan...
- 2. Double-click the “Network & Dial-Up Connections” icon.
- 3. Double-click the icon that corresponds to the connection to your F5D6231-4 Wireless Gateway.
- 4. Click “Properties.” After then, double-click “Internet Protocol (TCP/IP).”
- 5. All information you need to record is on the “Internet Protocol (TCP/IP) Properties” dialog bo...
- 6. Select “Obtain an IP address automatically” and then select “Obtain DNS server address automat...
- 7. Click “OK” or “Close” to close each window.
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the stop button. Click “Tools,” then “Internet Options.”
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- 1. From the Windows desktop, click the “Start” button, then “Programs,” then “Accessories,” and t...
- 2. In the “Command Prompt” window, type “IPCONFIG /RELEASE” and press the
key. - 3. Type “IPCONFIG/RENEW” and press the
key. Verify that your IP address is now 192.168.2.... - 4. Type “EXIT” and press
to close the “Command Prompt” window.
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows NT 4.0
- Step 1. Configure TCP/IP Settings
- 1. From the Windows desktop click “Start,” then “Settings,” and click “Control Panel.”
- 2. Double-click the “Network” icon, then select the “Protocols” tab.
- 3. Double-click “TCP/IP Protocol,” then select the “IP Address” tab.
- 4. In the “Adapter” drop-down list, be sure your Ethernet adapter is selected. If “Obtain an IP a...
- 5. In the “TCP/IP Properties” dialog box, click the “IP address” tab to locate your IP address, s...
- 6. Click the “DNS” tab to see the primary and secondary DNS servers. Record these values in the a...
- 7. After writing down your IP settings, click the “IP address” tab. Select “Obtain IP address aut...
- 8. Click “OK” again to close the “Network” window.
- 9. Windows may copy some files, and will then prompt you to restart your system. Click “Yes” and ...
- Step 2. Disable HTTP Proxy
- Internet Explorer
- 1. Open Internet Explorer and click the stop button. Click “Tools,” then “Internet Options.”
- 2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings......
- 3. Clear all the checkboxes.
- 4. Click “OK,” and then click “OK” again to close the “Internet Options” window.
- Netscape
- Internet Explorer
- Step 3. Obtain IP Settings from Your Gateway
- 1. From the Windows desktop, click the “Start” button, then “Programs.” After then, select “Comma...
- 2. In the “Command Prompt” window, type “IPCONFIG/RELEASE” and press the
key. - 3. Type “IPCONFIG /RENEW” and press the
key. Verify that your IP address is now 192.168.2... - 4. Type “EXIT” and press
to close the “Command Prompt” window.
- Step 1. Configure TCP/IP Settings
- Configuring Your Macintosh Computer
- Step 1. Configure TCP/IP Settings
- 1. Pull down the Apple Menu. Click “Control Panels” and select “TCP/IP.”
- 2. In the TCP/IP dialog box, make sure that “Ethernet” is selected in the “Connect via:” field.
- 3. All the information you need to record is in the “TCP/IP” dialog box. Use the space below to r...
- 4. After writing down your IP settings, select “Using DHCP Server” in the “Configure” field and c...
- 5. Another box will appear asking whether you want to save your TCP/IP settings. Click “Save.”
- Step 2. Disable HTTP Proxy
- Step 3. Obtain IP Settings from Your Gateway
- Step 1. Configure TCP/IP Settings
- Configuring Your Computer with Windows 95/98/Me
- Configuring Your Gateway
- 1. Open your Web browser (i.e. Internet Explorer or Netscape Navigator) and click the stop button.
- 2. In the “Address” field type “http://192.168.2.1” or “http://192.168.2.1:88” and press
... - 3. On the main page of the Gateway Web console, you will see the Gateway status information as be...
- Configuring LAN
- Configuring Internet/WAN
- Configuring Wireless
- Configuring Firewall
- Configuring Utilities
- 1. Click the “Reset Router” button to reset the configuration.
- 2. To restore the factory default settings, click the "Restore Defaults" button.
- 3. Mostly, Belkin may release new versions of the Router's firmware time to time. Firmware update...
- 4. The F5D6231-4 enters with NO password. For more security, you should add a password here. As y...
- Common Configurations for Popular ISPs
- Specifications
