User Manual

I can’t connect to the Internet wirelessly.

If you are unable to connect to the Internet from a wireless

computer, please check the following items:

1. Look at the lights on your wireless router. If you’re using a

Belkin Wireless Router, the lights should be as follows:

• The “Power” light should be on.

• The “Connected” light should be on, and not blinking.

• The “WAN” light should be either on or blinking.

If your Wireless Router’s lights match these descriptions, go to

number 2, below.

If this is NOT the case, please contact Belkin Technical Support.

If you are not using a Belkin Wireless Router, consult that router

manufacturer’s user guide.

2. Open your Wireless Networking Utility (WNU) software by

clicking on the icon in the system tray at the bottom right-hand

corner of the screen. The tray icon should look like this (the

icon may be red or green):

3. The exact window that opens should have a list of “Available

Networks”. Available networks are wireless networks to which

you can connect.

If you are using a Belkin 802.11g (54g) Router, “Belkin54g” is the

default name.

If you are using a Belkin 802.11b Router, the default name should

be “WLAN”.

If you are NOT using a Belkin Router, please consult your router

manufacturer’s user manual for the default name.

The name of your wireless network appears in “Available

Networks”.

Troubleshooting

section