Wireless G Plus Notebook Card Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B.V.
Wireless G Plus Notebook Card Connect your notebook computer to a wireless network ����� ������� ����� User Manual ��� �� � � ������ ������� ������� F5D7011 ��
Table of Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement of your Wireless Networking Hardware for Optimal Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction 1 2 3 4 Benefits of a Home Network Your Belkin Home Network will allow you to: • Share one high-speed Internet connection with all the computers in your home • Share resources, such as files, and hard drives among all the connected computers in your home • Share a single printer with the entire family • Share documents, music, video, and digital pictures • Store, retrieve, and copy files from one computer to another • Simultaneously play games online, check Internet email, and chat Advantages
Introduction Placement of your Wireless Networking Hardware for Optimal Performance Your wireless connection will be stronger the closer your computer is to your wireless router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your wireless router and connected devices increases. This may or may not be noticeable to you.
Introduction Avoid Obstacles and Interference Avoid placing your wireless router near devices that may emit radio “noise”, such as microwave ovens. Other objects that can inhibit wireless communication can include: • Refrigerators • Washers and/or dryers • Metal cabinets • Large aquariums • Metallic-based, UV-tinted windows If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path between your computers and wireless router. 3.
Introduction For more wireless networking products from Belkin, use the detailed Site Survey and wireless channel information included in your User Manual. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important.
Overview 1 Product Features 2 3 4 • 2.4GHz ISM (Industrial, Science, and Medical) band operation • Integrated easy-to-use Wireless Configuration Utility • CardBus interface, for operation in virtually any notebook computer 5 • WPA, WPA2, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption 6 • Wireless access to networked resources • Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking modes • Data rate of up to 125Mbps* in G Plus, 54Mbps (802.11g), or 11Mbps (802.
Overview Applications and Advantages • Wireless roaming with a laptop around the home or office Offers the freedom of networking without cables • Connection rates of up to 54Mbps or 125Mbps* using G Plus Provides immediate high-speed wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b and 802.11g products • Compatibility with 802.11b products 802.11g wireless LAN solutions are backward-compatible with existing Wi-Fi (IEEE 802.
Overview (b) 1 2 3 4 (c) 5 6 (a) Power LED Lights up when the Card is powered on (b) Activity LED Lights up when the Card is active (c) Card Connector Part of the Card that fits into your computer’s CardBus slot System Requirements • PC-compatible laptop with one available CardBus slot • Windows ® 2000 or XP Package Contents • Wireless G Plus Notebook Card • Quick Installation Guide • Installation Software CD • User Manual 7 section (a)
Installing and Setting up the Card Step 1 Install the Software Important note: Install the software before inserting the Card. 1.1 Insert the Installation Software CD into your CD-ROM drive. 1.2 The Wireless Networking Utility (WNU) setup screen will automatically appear (may take 15–20 seconds to appear). 1.3 Click “install” from the menu.
Installing and Setting up the Card Step 2 Plug the Card into an Available CardBus Slot on your Notebook Computer 2.1 During the install process, you Note: If your system did not prompt you to insert your Card after the installation is completed, please do so now. Note: If you are using the Windows XP operating system, you will not be prompted to reboot until after the drivers are installed. 2.2 The wizard will prompt you to install software for the Card.
Using the Belkin Wireless Networking Utility Installing and Setting up the Card Step 3 Use the Belkin Wireless Networking Utility 3.1 After restarting your computer, double-click the Wireless Networking Utility (WNU) icon on the desktop screen. 3.2 The WNU screen will appear. 3.3 Select a network to connect to from the “Available Networks” list and click “Connect”. Note: In order to see your available networks, you must be near a working wireless router. 3.
Using the Belkin Wireless Networking Utility After successfully installing the Belkin Wireless Networking Utility (WNU), configurations for wireless connection and security are just a few easy clicks away. Accessing the WNU from the Windows System Tray To access the WNU, simply place your mouse pointer and right-click over the WNU icon on the Windows task tray. 1 2 3 5 6 If the icon is not present, click on “Start > Programs > Wireless Utility”. The WNU’s default screen is the “Current Status” tab.
Using the Belkin Wireless Networking Utility Network Status This window displays the connectivity status of the current network. It even displays connectivity between the computer and router, and router and Internet. In the event of a connectivity problem, this window can be used to determine the problem’s source (e.g. computer, router, or Internet/modem).
Using the Belkin Wireless Networking Utility 1 Connection Failure Other options will appear during attempts to reconnect. To stop connecting, click “Stop” and to reattempt connection, click “Retry”. 2 3 5 6 Network Status and Solution Tips To further understand the current Network Status, click “Open Wireless Utility”. The default screen will be the “Current Status” tab and the “Network Status” section determines which connections are good and/or faulty.
Using the Belkin Wireless Networking Utility Setting Wireless Network Profiles The “My Connections” tab on the WNU allows you to add, edit, and delete connection profiles. It also displays signal strength, security, and network type. Securing your Wi-Fi Network ® If you choose to connect to a secure network, determine the type of security (WPA or WEP*) and use the appropriate field in the dialog box. *Note: When you select a network using encryption, you will first see the simple security screen.
Using the Belkin Wireless Networking Utility 1 2 3 5 6 Note: Types of security Wireless Equivalent Privacy (WEP) is a less secure, but more widely adopted wireless security protocol. Depending on the security level (64- or 128-bit), the user will be asked to input a 10- or 26-character hex key. A hex key is a combination of letters, a–f, and numbers, 0–9. Wi-Fi Protected Access (WPA) is the new standard in the wireless security. However, not all wireless cards and adapters support this technology.
Using the Belkin Wireless Networking Utility At the time of this User Manual’s publication, there are four encryption methods available.
Using the Belkin Wireless Networking Utility 128-Bit Encryption Encryption Keys After selecting either the 64-bit WEP or 128-bit encryption mode, it is critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another. You can enter your key by typing in the hex key. A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9.
Using the Belkin Wireless Networking Utility WPA2 requires Advanced Encryption Standard (AES) for encryption of data, which offers much greater security than WPA. WPA uses both Temporal Key Integrity Protocol (TKIP) and AES for encryption. Setting up your Wireless Router to use Security To start using security, you need to first enable WEP or WPA for your wireless router. For Wireless Routers from Belkin, these security features can be configured by using the web-based interface.
Using the Belkin Wireless Networking Utility WEP Setup 1 64-Bit WEP Encryption 2 1. Select “WEP” from the “Data Encryption” drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually. 3 4 For instance: 5 AF 0F 4B C3 D4 = 64-bit WEP key 6 3. Click “Save” to finish. Encryption in the wireless router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings.
Using the Belkin Wireless Networking Utility WARNING: If you are using a wireless client to turn on the security settings in your wireless router, you will temporarily lose your wireless connection until you activate security on your wireless client. Please record the key prior to applying changes in the wireless router. If you don’t remember the hex key, your client will be locked out of the wireless router. 128-Bit WEP Encryption 1. Select “WEP” from the drop-down menu. 2.
Using the Belkin Wireless Networking Utility 3. Click “Save” to finish. Encryption in the wireless router is now set. Each of the computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are using a wireless client to turn on the security WPA-PSK (no server) Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking. 1.
Using the Belkin Wireless Networking Utility Wireless Networking Utility Options The “Options” tab on the Wireless Networking Utility (WNU) provides the user the ability to customize his or her WNU settings. WNU Help The WNU “Help” tab provides users with access to online and telephone support, as well as advanced diagnostic tools.
Using the Belkin Wireless Networking Utility Advanced Diagnostic Tools 1 The “Advanced Diagnostic Tools” section is the central control panel for all the settings of the hardware and software components of the wireless network. It provides an array of tests and connectivity services to ensure optimal network performance.
Troubleshooting I can’t connect to the Internet wirelessly. If you are unable to connect to the Internet from a wireless computer, please check the following items: 1. Look at the lights on your wireless router. If you’re using a Belkin Wireless Router, the lights should be as follows: • The “Power” light should be on. • The “Connected” light should be on, and not blinking. • The “WAN” light should be either on or blinking. If your Wireless Router’s lights match these descriptions, go to number 2, below.
Troubleshooting 3. The window that opens should have a list of “Available Networks”. Available networks are wireless networks to which you can connect. If you are using a Belkin 802.11g (G Plus) Router, or Belkin 802.11g (54g) Router, “Belkin54g” is the default name. The name of your wireless network appears in “Available Networks”. 1 2 3 4 If you are NOT using a Belkin Router, please consult your router manufacturer’s user manual for the default name.
Troubleshooting The name of your wireless network DOES NOT appear in the list of “Available Networks”. If the correct network name is not listed, check the SSID settings to see if they match. The SSID is case-sensitive and the spelling on each computer must be exactly the same in order for the Card to connect to the wireless router. Note: To check the SSID settings or look for an available network, double-click the Signal Indicator icon to bring up the “Wireless Networks” screen.
Troubleshooting Link LED is blinking slowly; I cannot connect to a wireless network or the Internet. If your Card appears to be functioning properly, but you cannot connect to a network or you have a red wireless icon at the bottom of your screen, the problem may be that there is a mismatch between the network name (SSID) settings in your wireless network properties.
Troubleshooting Data transfer is sometimes slow. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 to 200 feet.
Troubleshooting Changing the wireless channel – Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. The default channel the router is shipped with is channel 11. You may choose from several other channels depending on your region; see your router’s user manual for instructions on how to choose other channels.
Troubleshooting Why are there two wireless utilities in my system tray? Which one do I use? There are several features and advantages from using the WNU over the Windows XP Wireless Zero Configuration utility. We offer a site survey, detailed link information, and adapter diagnosis, to name a few. It’s essential to know which utility is managing your Card. We recommend using the WNU.
Troubleshooting Technical Support You can find technical support information at www.belkin.com/ networking. If you want to contact technical support by phone, please call: US: 877-736-5771 310-898-1100 ext.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7011 to which this declaration relates, complies with Part 15 of the FCC Rules.
Information Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. 1 2 3 Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. 4 Europe-European Union Notice Radio products with the CE 0682 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community.
Information Belkin Corporation Limited Lifetime Product Warranty What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin Corporation warrants the Belkin product for the lifetime of the product. What will we do to correct problems? Product Warranty.
Information How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.