User's Manual

G Wireless Router

SECTIONSTable of Contents 12345678 109

TROUBLESHOOTING

Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security and I am NOT using a Belkin client card for a home network.

Enabling WPA-PSK (no server)

1. In systems running Windows XP, click “Start > Control Panel >

Network Connections”.

2. Right-click on the “Wireless Networks” tab. The “Wireless Network

Connection Properties” screen appears. Ensure the “Use Windows

to configure my wireless network settings” box is checked.

3. Under the “Wireless Networks” tab, click the “Configure” button,

and you will see the client card properties screen.

4. For a home or small business user, select “WPA-PSK” under

“Network Administration”.

5. Select “TKIP” or “AES” under “Date Encryption”. This setting will

have to be identical to the G Wireless Router or access point that

you set up.

6. Type your encryption key in the “Network key” box.

Important: Enter your pre-shared key. This can be from eight to 63

characters and can be letters, numbers, or symbols. This same key

must be used on all of the clients that you set up.

7. Click “OK” to apply settings.

Solution:

If you are NOT using a Belkin WPA Wireless Desktop or Wireless

Notebook Network Card and it is not equipped with WPA-enabled

software, a file from Microsoft called “Windows XP Support Patch for

Wireless Protected Access” is available for free download:

http://www.microsoft.com/downloads/search.aspx?displaylang=en

Note: The file that Microsoft has made available works only with

Windows XP. Other operating systems are not supported at this time.

You also need to ensure that the wireless card manufacturer supports

WPA and that you have downloaded and installed the latest driver from

their support site.

Supported Operating Systems:

Ř Windows XP Professional

Ř Windows XP Home Edition