Bluetooth ™ USB Adapter Connect your peripherals and computing devices, without cables En Quick Installation Quide F8T008 - F8T009 P74768_F8T008-9_QIG.
Introduction PC System Requirements • PC-compatible computer, CPU speed of 200MHz or above • Memory: 64MB or above, 128MB recommended • One available USB port, USB 1.1 standard • Windows ® 98 SE, Me, 2000, and XP Mac® System Requirements • One available USB port, USB 1.1 standard • Mac OS ® X v10.3 and higher* Product Contents • Bluetooth USB Adapter • CD-ROM for installation software and documentation • User Manual • Quick Installation Guide *Mac OS X driver and software provided by Apple ®.
Step 1: Software Setup Software Setup for Windows 98 SE, Me, 2000, and XP To install the software for the USB Adapter, follow the instructions below: Note: The installation process for Windows XP may look slightly different from Windows 98 SE, Me, and 2000. Note: Do not insert the USB Adapter into the USB port prior to software installation. 1. Insert the software installation CD-ROM into the PC’s CD-ROM drive. 2. The “Software InstallShield Wizard” window appears.
Step 1: Software Setup 3. Choose “I accept the terms in the 4. Specify the location where the software license agreement” to accept the license agreement. Click on “Next” to continue. files will be installed on your hard drive. It is recommended that you install the software in the default directory “C:\Program Files\belkin\Bluetooth\ Software\”. Click on “Next” to continue. 3 P74768_F8T008-9_QIG.
Step 1: Software Setup 5. Confirm that the device software 6. The InstallShield Wizard will begin to is ready to be installed and click on “Install”. install the Belkin Bluetooth Software. This may take several minutes. 4 P74768_F8T008-9_QIG.
Step 1: Software Setup 7. During the installation process you may be prompted to insert your USB Adapter. If your USB Adapter is not plugged into your computer at this time, you may insert it into an available USB 1.1-compliant port on your desktop or notebook computer, then click “OK” to continue. Click on “Cancel” to continue installation without the Bluetooth device inserted. Refer to the “Hardware Installation” section of this User Manual for instructions for installing the hardware.
Step 1: Software Setup 8. Confirm the completion of the software installation; click “Finish” and restart the system if prompted to do so. 6 P74768_F8T008-9_QIG.
Step 2: Hardware Setup Hardware Setup for Windows 98 SE, Me, 2000, and XP Follow these instructions to install your USB Adapter on your PC. Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate electrical components. To protect your device, always touch the metal chassis of your computer before handing the USB Adapter. This will ground any potential electrostatic discharge. Avoid touching the metal connector when handling the USB Adapter.
Step 2: Hardware Setup 3. Browse for the location of the device 4. If you receive the following “Hardware driver “:\Program Files\Belkin\ Bluetooth\Software\bin\” then click “Next”. installation notice”, click on “Continue Anyway” to continue with the installation process. 8 P74768_F8T008-9_QIG.
Step 2: Hardware Setup 5. A window will appear that confirms the completion of the hardware installation; click on “Finish” to complete the installation process. 9 P74768_F8T008-9_QIG.
Step 3: Uninstalling the Software Uninstalling the Software for Windows 98 SE, Me, 2000, and XP Follow these instructions to uninstall your USB Adapter on your PC. 1. Insert the CD-ROM included with your USB Adapter. 2. This “InstallShield Wizard” should automatically load. If it does not load, explore the CD and run the “Setup.exe” file. 3. The “InstallShield” window should now appear. Click “Next” to continue with the uninstall process. 10 P74768_F8T012-13_QIG.
Bluetooth ™ Belkin Corporation 501 West Walnut Street, Compton, CA 90220-5221, USA +1 310 898 1100 +1 310 898 1111 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.