Network Router User Manual

2120
Manually Configuring your Router
2120
DHCP Client List
You can view a list of the computers, which are connected to your
network. You are able to view the IP address of the computer, the
host name (name of the computer in your network), and the MAC
address of the computer’s network interface card (NIC). Pressing the
“Refresh” button will update the list. If there have been any changes,
the list will be updated.
Shared Folders
You can view the shared files and printers by clicking on the host
name (name of the computer in your network) below ”Shared folders.”
Block Computer
You can enable blocking of locally shared files and printers by
selecting the “check box” next to the host name (name of the
computer in your network) below ”Block Computer.”
Internet WAN
Connection Type
From the “Connection Type” page, you can select the type of connection
you want to use by selecting the “Connection Type” from the pull-down list.
Setting your ISP Connection Type to PPPoE or PPPoA
Enter the PPPoE (Point-to-Point Protocol over Ethernet) or PPPoA
information in the provided spaces, and click “OK” to activate your
settings. This information is provided by your ISP.