Network Router User Manual

21
Manually Configuring your Router
21
section
2
1
3
4
5
6
7
8
9
10
User Name – Enter the ISP assigned user name.
Password – Enter your password (assigned by your ISP).
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) parameter here (assigned by your ISP).
Encapsulation – Select your encapsulation type (supplied by your ISP) to
specify how to handle multiple protocols at the ATM transport layer.
LLC
– Point-to-Point Protocol over ATM Logical Link Control allows multiple
protocols running over one virtual circuit (more overhead).
VC-MUX
– Point-to-Point Protocol over ATM Virtual Circuit Multiplexer (null
encapsulation) allows only one protocol running per virtual circuit with fewer
overheads.
Setting your ISP Connection Type to Ethernet Connection over
ATM (ETHoA)
VPI/VCI –
Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) parameter here (assigned by your ISP).
Encapsulation – Select LLC or VC MUX (assigned by your ISP).