User manual

3332
Advanced Setup Method
Advanced Setup Method
33
section
2
1
3
4
5
6
7
VLAN
VLAN Table:
In this table you can click on the ADD VLAN button to add a VLAN
binding or click on EDIT to edit an existing binding, or click on
DELETE to remove a Binding.
VLAN Profile:
This screen will appear if you click on “ADD VLAN” or “EDIT” from the
VLAN page.
WLAN connection. For instance if you have created a VLAN Binding
called “Test”, and you want anything connected to the wireless to be
on that VLAN, then you would change the WLAN setting on this page
from “Default” to the one you created called “Test”.
Parameter Description
DHCP SERVER
DHCP Option 60 Vendor ID:
If you wish you can specify the Name of your DHCP Server (Optional)
Lease Time:
Specify the length of time that the DHCP will assign an IP address to
a computer for.
IP Address Pool
Start IP:
Specify the start IP address of the DHCP pool. Do not include the
gateway address of the VoIP Router in the client address pool. (See
“TCP/IP Configuration”). If you attempt to include the VoIP Router
gateway address (10.1.1.1 by default) in the DHCP pool, an error
dialog box will appear. If you change the pool range, make sure the
first three octets match the gateway’s IP address, i.e. 10.1.1.xxx.
End IP:
Specify the end IP address of the DHCP pool.
Domain Name:
If your network uses a domain name, enter it here. Otherwise, leave
this field blank.