User manual

3736

Advanced Setup Method

section

See the description of the parameters below.

Parameter Description

SSID: Service Set ID. The SSID must be the same on the VoIP Router

and all of its wireless clients. The SSID is the name of your wireless.

Note: The SSID is case sensitive and can consist of up to 32

alphanumeric characters. (Default: WLAN)

SSID Broadcast: Enable or disable the broadcasting of the

SSID. Enable SSID broadcasting on the wireless network for easy

connection with client PCs. (Default: Enable)

Wireless Mode: This device supports both 11g and 11b wireless

networks. Make your selection depending on the type of wireless

network that you have. (Default: Mixed mode 11b+11g)

Channel: The radio channel used by the wireless router and its clients

to communicate with each other. This channel must be the same on

the VoIP Router and all of its wireless clients. (Default: 6)

Note: If you experience poor performance, you may be encountering

interference from another wireless device. Try changing the channel,

as this may eliminate interference and increase performance.

Wireless

The VoIP Router also operates as a wireless access point, allowing

wireless computers to communicate with each other. To configure this

function, you need to enable the wireless function, and you may also

setup the security options if needed.

Wireless Settings

Check Enable or Disable and click “SAVE SETTINGS”. This will turn

the wireless function on or off and enable or disable wireless clients

to connect to the modem.

Channel and SSID

These settings should be left as default unless you have a reason

to change them. You can change the Service Set ID (SSID) and a

common radio channel to be used by the VoIP Router and all of

its wireless clients. Be sure you configure all of its clients to the

same values. The SSID is case-sensitive and can consist of up to

32 alphanumeric characters. Functioning as an access point, the

Gateway can be configured for roaming clients by setting the SSID

and wireless channel.