User manual

8180
Advanced Setup Method
Advanced Setup Method
81
section
2
1
3
4
5
6
7
Firmware Upgrade
Use this screen to update the firmware or user interface to the latest
versions.
Download the file to your hard drive from the Belkin web site or from
another source. Then click Browse... to find the file on your computer.
Select the firmware file and click “Open”. Click “Save Settings” to
start the upgrade process.
With a DDNS (Dynamic DNS) connection you can host your own web
site, email server, FTP site and more at your own location even if you
have a dynamic IP address.
Parameter Description
Dynamic DNS: Enable or disable the DDNS function.
Provider: Select which provider you wish to use for your DDNS
service, either DynDNS or TZO.
Tools
Use the Tools menu to back up the current settings, to restore
previously saved settings, or to restore the factory default settings.
Configuration Tools
Check Backup Router Configuration and click “NEXT” to save your
VoIP Router’s configuration to a file named “backup.cfg” on your PC.
You can then check Restore from saved configuration file (backup.cfg)
to restore the saved backup configuration file.
To restore the factory settings, check Restore router to Factory
Defaults and click “NEXT.” You will be asked to confirm your decision.
Click “APPLY” to proceed, or “CANCEL” to go back.