User manual

8988
Appendices
Appendices
89
section
2
1
3
4
5
6
7
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on the previous
page.
2. Select “Use the following IP address.” Enter an IP address based
on the default network which is 10.1.1.x (where x is between
2 and 254), use 255.255.255.0 for the subnet mask and the IP
address of the VoIP Router 10.1.1.1 for the Default gateway field.
Your computer is now configured to connect to the VoIP Router.
Configuring Your Computer in Windows XP
DHCP IP Configuration
1. On the Windows desktop, click Start/Control Panel.
2. In the Control Panel window, click Network Connections or
click Network and Internet Connections and then Network
Connections.
3. The Network Connections window will open. Locate and double-
click the Local Area Connection icon for the Ethernet or Wireless
adapter that is connected to the VoIP Router.
4. In the connection status screen, click Properties.
5. Double-click Internet Protocol (TCP/IP).
6. If “Obtain an IP address automatically” and “Obtain DNS server
address automatically” are already selected, your computer is
already configured for DHCP. Click Cancel to close each window.