Conserve Smart AV Auto-Off Surge Protector ™ User Guide
resettable circuit breaker and power switch master socket master controlled sockets not controlled sockets UK Now you can control power to your whole entertainment system with the push of a button—your TV’s power button. The TV Master Socket senses when your TV is on or off and controls power to five peripheral sockets for your components. When you turn your TV off, power to the peripheral components goes off too—including standby power—so no energy is wasted.
Quick Setup Guide Plug a “master” device into the green Master 1 Socket. This will most likely be a television or stereo amplifier. This master device will control the four Master-Controlled Sockets. Plug in any devices that do not require 2 constant round-the-clock power into one of the four Master-Controlled Sockets. Suggested use with the following devices: in devices that need 24-hour 3 Plug power into one of the two dark-gray Not-Controlled Sockets.
your Conserve Smart AV Auto4 Plug Off Surge Protector into any wall socket. Switch power button ON. on your master device (device 5 Switch plugged into the green socket) as you normally would. With a television you might use your TV remote control or power button located on the television set.
you have finished using your master 7 After device and turned it off using your remote or device power button, your peripheral devices will also turn off within 30 seconds and no longer consume any electricity. indicator lights product features The “Protected” light should be on when the power switch is turned on.
troubleshooting 2 Non-Controlled Sockets (Power is always on at these sockets unless the built-in circuit breaker has tripped).
Specifications Continuous Duty Electrical Rating: 250V~/13A/50Hz/3250W Maximum Energy Dissipation: 1800 Joules • H-N: 600 Joules • H-G: 600 Joules • N-G: 600 Joules Clamping Voltage (3-Line): 1.5KV Safety Information • To reduce the risk of electrical shock, unplug the unit and allow it to cool before cleaning. • Do not “daisy-chain” this product or use it with extension cords. The Belkin Conserve Smart AV’s power cord must be plugged directly into an AC power source to ensure proper surge protection.
What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Use Energy Wisely Belkin Tech Support http://www.belkin.com/support For more information and to learn about other Belkin Conserve energy management products, please go to belkin.com/conserve 8820uk00545 F7C013 Using electricity or driving a car does have an effect on the environment, but by using energy wisely we can prevent waste and reduce carbon dioxide (CO2) emissions. CO2 is a greenhouse gas that accumulates in the Earth’s atmosphere, trapping heat from the sun and keeping the planet warm.
