DVD/CD PLAYER DVD-S35/S31 Operating Instructions Contents DVD-RAM VIDEO PLAYBACK DOWN ZOOM MODE UP OPEN/CLOSE DVD / CD PLAYER DVD-S35 For error-free handling of your appliance, please read these operating instructions carefully. Keep this manual for future reference. Downloaded From Disc-Player.
Precautions Inside of product Tuotteen sisällä Dear customer Thank you for trusting and purchasing this high-quality product. Panasonic is one of the leading companies of the consumer electronics industry. We are sure that this DVD player will meet with all your expectations. Voltage: Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power sources. Check the source carefully when setting the unit up on a ship or other place where DC is used.
Warning SUOMI WARNING: VAROITUS: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The DVD player DOWN DVD-RAM VIDEO PLAYBACK ZOOM MODE UP OPEN/CLOSE DVD / CD PLAYER DVD-S35 Stand-by/On switch /I Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Stand-by indicator When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.
The remote control unit SLEEP SETUP OPEN/CLOSE A.SRD 1 2 3 4 5 6 7 8 9 0 10 CINEMA D.ENH CANCEL GROUP SLOW/SEAR SKIP PAUSE STOP DIRECT NAVIGATOR CH PLAY PLAY LIST MENU TOP MENU ENTER DISPLAY RETURN SUBTITLE AUDIO ANGLE/PAGE QUICK REPLAY PLAY MODE ZOOM REPEAT POSITION MEMORY DVD PLAYER N2QAJB000069 Cursor keys ENTER to accept the menu function you selected SLEEP SETUP OPEN/CLOSE A.SRD CINEMA D.ENH GROUP CANCEL 0...
Before you make any connections Connections ! Verify that all devices to be connected up are unplugged from the AC mains. Read the operating instructions of your TV set. Attach the unit as illustrated on this page. ! Note on all connections shown Attach the unit directly to the TV set. If you let the player connection go through a video recorder you will experience a disturbed picture when playing copy-protected DVDs. To avoid sound quality problems deactivate function A.
Connections COMPONENT VIDEO OUT terminal Rear of TV set (example) COMPONENT VIDEO IN terminal AUDIO IN R PR L PB Y Red White The Component Video Out terminal separately outputs the colour difference signals ( PB/PR ) and the brightness signal Y, thus providing for an enhanced resolution and colour response. ! The labelling of the Component Video In terminal may differ depending on the TV set or monitor you use ( e.g. Y/PB/PR,Y/B-Y/R-Y, Y/CB/CR ).
Home cinema AUDIO IN R Red L Analogue connection ( AUDIO OUT ): Amplifier (example) To be able to hear sound in stereo or Dolby Pro Logic quality, attach an amplifier or an analogue audio component supporting these features. Connect the analogue outputs ( L and R ) with a "Dolby Pro Logic amplifier", for example. Attach the audio cables as shown on the illustrations. Make sure not to confuse the colours of cables or the labels of sockets ( white/L, red/R ).
Basic settings QUICK SETUP SETUP QUICK SETUP Die Menü-Sprache wählen. Select the menu language. SELECT ENTER English Français Deutsch Español Italiano Português Svenska Nederlands RETURN When the appliance is properly connected press to switch on the unit. Press the SETUP button on your remote control unit to display the QUICK SETUP menu which allows you to make some basic settings.
SETUP menu Options of the SETUP menu The SETUP menu contains options concerning menu items "Disc", "Video", "Audio", "Display" and "Others". A clearly arranged on-screen menu guides you to and through the options. SETUP DISC Disc Audio SELECT ENTER English Subtitle Automatic Menus English Ratings Level 8 ! ! ! ! TAB RETURN ! ! SETUP displays the SETUP screen. To select one of the SETUP sub-menus ( e.g. "Disc" ) press . To select the option to be changed press , then press ENTER to confirm.
SETUP menu Ratings 8 No Limit 7 6 5 4 3 2 1 0 Lock All Unlock Player Change Password Change Level Temporary Unlock Ratings Assign a rating to disallow the viewing of some scenes ( 1-7 ) or the entire DVDVideo disc ( 0 ). This feature is not supported by all DVD-Video discs. To select a rating ( factory setting is "8" ) When you select a rating between 0 and 7 you will be automatically prompted for a password. ! Type in a 4-digit code using the numeric key pad of your remote control unit.
SETUP menu TV Aspect : The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen). Choose the 16:9 format if your player is attached to a wide-screen TV set.
SETUP menu SETUP Audio PCM Down Conversion Dolby Digital SELECT ENTER No Bitstream PCM Down Conversion : Pulse Code Modulation PCM is the standard method used to record digital music signals on audio CDs. DVD-Videos can be produced using the linear PCM method which is based on a sampling frequency of up to 96 kHz. For reasons of copyright protection, the digital output of PCM audio signals may be limited to 48 kHz/16 bit.
SETUP menu Menu Language : Select a menu language as appropriate. On-Screen Messages : SETUP The TV screen displays the commands you give by pressing the buttons on the remote control unit. Select "Off" to suppress the display of on-screen commands. Display Menu Language TAB SELECT On-Screen Messages FL Dimmer ENTER English On Bright RETURN DISC Others Mixed Disc - Audio & Stills ENTER You can set the brightness of the display panel elements to "Bright", "Dim" or "Auto".
General playback The label must face up. Preparation Switch on the TV set and set it to the video input that matches the connection between player and TV set. Playback DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG ! OPEN/CLOSE opens the disc tray. Place the disc on the disc tray. ! PLAY closes the disc tray and automatically starts playing back the disc. The player may take some time to read all of the disc information! D MP3, WMA, CD Text : outputs some track information to the TV screen.
General playback Scene replay DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG ! QUICK REPLAY during playback. Every push of the button replays a couple of seconds of the current item; on a JPEG disc it will take you back a couple of pictures. However, you cannot go back to before the beginning of an item. D QUICK REPLAY is not supported by all discs. Frame-by-frame DVD-V DVD-A RAM VCD In pause mode, press remote control buttons .
General playback Automatic switch-off DVD-V DVD-A RAM VCD CD MP3 WMA WMA JPEG This function allows you to specify a playback time ( e.g. 90 min. ) after which the unit is to automatically switch itself off. ! SLEEP, the SLEEP dialogue is output to the display and the TV screen. Repeatedly press the button to browse the settings: OFF AUTO 60 min 90 min 120 min D AUTO : The unit switches itself off 5 minutes after the end of the playback time.
General playback Position memorized POSITION MEMORY VCD CD MP3 WMA WMA JPEG Use the Position Memory function if you wish to resume disc playback at a particular position. The position tag is retained when you change discs or when the unit goes into stand-by mode. You can tag and directly access up to 5 discs. This function is available only if the elapsed playback time is displayed when playing the disc. ! ! ! ! Position cleared DVD-V DVD-A RAM D POSITION MEMORY during playback.
General playback ZOOM 16:9 Standard 4:3 Standard ! ! . ZOOM during playback. Using the remote control buttons: Press to set the zoom factor; to select a zoom mode: ENTER and Or press the ZOOM MODE button on the appliance: Manual Zoom Mode Preset Zoom Mode Zoom Mode Off ! TITLE OFF . To restore the original ratio ! ZOOM until x 1.00 is displayed. The original ratio is also restored by opening the disc tray or when the unit goes into stand-by mode.
Programme play PROGRAM Programme play Choose a title and chapter, then press ENTER. No 1 T C Time Play Clear 0~9 Clear all SELECT NUMBER SELECT ENTER RETURN Press PLAY to start DVD-V DVD-A VCD CD MP3 WMA You can programme up to 32 chapters/tracks to be played in any order. ! PLAY MODE in stop mode until the "PROGRAM" screen appears. ! Type in the numbers using the RC unit's numeric key pad. D MP3 and WMA : Press ENTER to confirm your selection. ! PLAY .
Other functions ADVANCED SURROUND HP 1 SP 1 HP 2 SP 2 HP OFF SP OFF Cinema 1 Cinema 2 User Normal OFF VCD With 2 or more audio channels only Produces an effect similar to surround sound at the two front speakers ( SP ) or the headphones ( HP ). ! A.SRD Repeatedly press the button to browse the settings.
On-screen displays C 1 2 0 : 03 : 10 Digital 2 DEU 3/2.1 ch You can display on-screen information on disc and player ( OSD ) and manipulate various settings. Some DVD- discs do not support all of the settings. Please use the DVD menu instead. ! DISPLAY during playback. Enables the on-screen display feature. ! Use the cursor keys to make or change various settings. ! Some entries need to be confirmed by pressing ENTER. ! DISPLAY. The Progress Indicator will be displayed.
On-screen displays RAM JPEG DVD-V CD VCD MP3/WMA DVD-A PL Playlist: see page 25 P Picture: Displays the number and name of a picture you selected from a group. Type in the number to display a picture. Zoom: Zoom function ( see page 19 ). Bit Bitrate Display: Displays the video image data rate per second ( Mbps ) ( S35 only ). OSD Brightness: User-defined brightness of OSD displays. Advanced Surround: Produces an effect similar to surround sound at the two front speakers ( SP ) or the headphones ( HP ).
JPEG JPEG ALBUM G P Total 1 2 2 Group : 021112-1620 Picture : Flower ! 3 2 1 Your DVD player can output JPEG pictures ( Exif version 2.1 ) that were taken with a digital camera, for example, or generated by means of any other system. The resolution should range between 320 x 240 pixels and max. 6144 x 4096 pixels. Note that JPEG files must be extended by ".JPG", ".jpg", ".JPEG" or ".jpeg" and compressed in format 4:2:2 or 4:2:0.
! MP3 / WMA menu No 1 2 3 4 5 MENU G T Total 1 1 1 0 ~9 ! Group : NEW Tree CELEBRATE CHOSEN ONE YOUR LOVE, OH LORD I NEED YOU CHILD OF FORGIVENESS SELECT NUMBER SELECT ENTER RETURN Find Prev *A Next Find DVD-RAM menu ! ! ! ! Date 9/12 (THU) On 16:48 9/12 (THU) 20:00 Program Title Friends Used 0:01:00 ! News 0~ 9 SELECT NUMBER SELECT ENTER WMA CD text To search for tracks ! Press to select the "Find" item, then press ENTER to display the text box.
General notes on DVDs Title Disc Top Menu Menu Title Menu Title Menu MENU TOP MENU DVDs can contain titles and chapters that the producer of the disc put into a specific order. DVDs feature a Title menu that lists the available titles and chapters. However, you can choose to select and then play individual titles and chapters. DVD playback can be controlled and manipulated via the menu that the DVD player outputs to the TV screen.
Glossary of technical terms Analogue: As opposed to the digital processing method which only knows two states ( 1 or 0, on or off ), analogue processes consist of a multitude of values at any range of infinitely variable steps. This multiplicity is faced by the limited range of possibilities of storing and reproducing the relevant information. Bitstream: Multiple-channel digital audio data prior to its decoding and assignment to the different channels.
Before requesting service GENERAL PROBLEMS The player does not respond to function key commands: The remote control unit does not work: Playback does not start after pressing PLAY: ! Certain control operations are not available with some discs. ! Interference caused by lightning or static charge. Press [ /I ] to put the player into stand-by mode. Restart the player. ! Check if the batteries are in the right way round (+ and -).
Before requesting service AUDIO PROBLEMS There is no audio output and the sound is distorted: The loudspeakers emit loud noise: ! Check the connections. ! Deactivate the ADVANCED SURROUND effect. ! Go to the SETUP screen and check the Audio menu settings of "Dolby Digital","DTS Digital Surround" and "MPEG". PICTURE PROBLEMS The picture is disturbed when searching: ! This is a technical issue and not indicative of a malfunction. The screen outputs no picture: ! Check the connections.
This product features a copyright protection implement whose technology is protected by US patents and intellectual property rights owned by Macrovision Corporation and other copyright proprietors. The use of this copyright protection implement is subject to permission of Macrovision Corporation and is restricted to purely private use only. It is prohibited to examine this appliance for the purpose of unlicensed construction. Information Region code: This player accesses the regional codes stored on DVDs.
Specifications Disc formats S35 / S31 DVD-Video DVD-R DVD-Audio DVD-RAM SVCD Video-CD CD CD-R/RW --R R4.7 AUDIO RAM R A M 4.7 SUPER VIDEO DIGITAL AUDIO TEXT DIGITAL AUDIO DVD-V DVD-A RAM VCD CD WMA MP3 JPEG D It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM in all cases due to the type of disc or condition of the recording. 220-240 Volt mains voltage, 50Hz Power consumption: 13 Watt Power consumption in stand-by: approx.
Index page ADVANCED SURROUND 21,23 Analogue connection 8 Angle 22 Audio 9,10 Automatic switch-off 17 AV and component terminals 9,12 Batteries Basic settings Bitstream 7 9 13,27 Chapter review CINEMA Connections 18 21,23 6,7 DIALOGUE ENHANCER 21,23 Digital connection 8 Disc formats 31 Dolby Digital 8,13,27,30 DTS Digital Surround 8,13,27,30 DVD menu 26 Dynamic Range Compression 13 Field Frame Frame-by-frame 12 12 16 General playback page 15 Information 30 JPEG 24 Laser radiation Letterbox 2 12