User Guide

ManualsBrandsBelkin ManualsOtherERICSSON P900 & PC SUITE

Connecting your Bluetooth Adapter to the Sony Ericsson P900 and PC Suite.

Connecting your Bluetooth Adapter to the Sony

Ericsson P900 and PC Suite.

Use with Belkin Bluetooth SoftwareVer. 1.3.x & 1.4.2.10

Bluetooth adapters F8T001, F8T003, and F8T006-PC.

Summary of content (6 pages)

PAGE 1
Connecting your Bluetooth Adapter to the Sony Ericsson P900 and PC Suite. Use with Belkin Bluetooth SoftwareVer. 1.3.x & 1.4.2.10 Bluetooth adapters F8T001, F8T003, and F8T006-PC. Connecting your Bluetooth Adapter to the Sony Ericsson P900 and PC Suite.
PAGE 2
Before Starting: 1. Make sure you have the latest Sony Ericsson PC Suite software loaded on the computer. The Nokia PC Suite is required to connect to the Sony Ericsson P900. 2. Make sure the Belkin Bluetooth software and adapter is installed. Section: 1 Activating Bluetooth and pairing procedure. 1. 2. 3. 4. 5. 6. 7. Go to the Main Menu on your Sony phone P900. In Control Panel, go to Connections, Bluetooth, Settings. Make sure that Bluetooth is turned on, check visible to other devices.
PAGE 3
Section: 2 Getting the Com port on the computer 1. On your Computer, open Bluetooth Neighborhood or Double Click on the Bluetooth icon on the Lower right of your Task bar. 2. On the Bluetooth menu on the left side click on Search for Devices in range or Entire Bluetooth Neighborhood. 3. Make sure that the Sony Ericsson P900 has a check mark next to it meaning that it is Paired. 4. On the left side Click on View My Bluetooth Services or My Device in Windows 2000. 5.
PAGE 4
6. Verify the COM port which is on (Com 3) is selected and that Start up Automatically is check and uncheck Secure Connection and click on Apply. 7. Double Click on the Phone Connection Link icon (PC Suite) on your taskbar. 8. Make sure that Com 3 is the only Com port checked as shown in step 6. 9. Go Back to Entire Bluetooth Neighborhood or view devices in Range and double click on the Paired Sony Ericsson Phone Icon. Connecting your Bluetooth Adapter to the Sony Ericsson P900 and PC Suite.
PAGE 5
10. Double click on the serial Port icon. 11. Accept the connection on your Phone. 12. It will say “Status: Connecting Bluetooth Serial Port”. 13. You may get an error on your computer saying that COM 0 is being used. Click OK. 14. You may get a connection fail prompt. Click OK 15. You are now connected to your phone. Verify the connection by double clicking on the Phone Connection Link icon on the bottom right of you’re tool bar.
PAGE 6
Connecting your Bluetooth Adapter to the Sony Ericsson P900 and PC Suite.