User manual

En
Hardware Installation (continued)
7
4. Connect the keyboard and mouse to the OmniView
™
PRO. If you have an AT-style
keyboard, you will need an AT-PS/2 adapter (Belkin Part# F2N017).
5. Connect the first computer's VGA cable to the OmniView
™
PRO. Using the VGA cable
(Belkin Part# F2N025-XX-T or A3H981-XX), connect the male end of the cable to the
VGA port on the computer, and the female end on the PC1 VGA port at the back of
OmniView
™
PRO.
PS/2 Style Keyboard
F2N025-XX-T
Back of OmniView
™
PRO
Back of OmniView
™
PRO
Back of PC
PS/2 Mouse
3. Connect the monitor to the OmniView
™
PRO. Using the attached cable, or the one
included with your monitor, connect it to the HDDB15 female port on the back of the
OmniView
™
PRO labeled with the monitor symbol at the CONSOLE section.
Back of OmniView
™
PRO
P73055/F1D108-OSD/EU/man.qxd 4/21/00 2:25 PM Page 7