User manual

12
Usage (continued)
Enable AutoScan mode
In AutoScan mode, the OmniView
™
PRO remains on one port for a number of seconds, before
switching to the next. This time interval is set in the On-Screen Display menu.
NOTE: There is no mouse or keyboard control in this mode. This is necessary to prevent errors.
Otherwise, if the user is moving the mouse or using the keyboard when the OmniView
™
PRO switches to the next port, data flow is interrupted and will cause erratic mouse
movement and/or the wrong characters to show up when using the keyboard.
To get out of AutoScan mode, press the SPACEBAR.
CONSOLE
Keyboard,
mouse and
monitor
Bank 0 (Master)
Bank 1 (slave)
Bank 2 (slave)
etc...
Bank F (slave)
12345678
9 10111213141516
17 18 19 20 21 22 23 24
121 122 123 124 125 126 127 128
AutoScan Mode:
P73055/F1D108-OSD/EU/man.qxd 4/21/00 2:25 PM Page 12