OmniView PRO2 Series KVM Switch ™ User Manual F1DA104T F1DA108T F1DA116T PRO2 Series 13
TABLE OF CONTENTS Overview Feature Overview . . . . . . Equipment Requirements Operating Systems . . . . . Unit Display Diagrams . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OmniView PRO2 Series KVM Switch ™ Congratulations on your purchase of this Belkin OmniView PRO2 Series KVM Switch (the PRO2). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a reasonable price. Designed to give you control over multiple computers and servers from one console, Belkin PRO2s come in a variety of capacities suitable for all configurations, large or small.
OVERVIEW The PRO2s allow you to control up to a maximum of 256 computers with one keyboard, monitor, and mouse. They support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGA-2 video. They support both PS/2 and USB output. This enables cross-platform control over PCs and USB-based computers including USB Sun™ workstations and Mac® computers. Feature Overview Hot Keys: Hot key functionality allows you to select a desired port using designated key commands.
OVERVIEW Front-Panel Push Button: Direct-access port selectors, located conveniently on the front panel of the PRO2, allow for simple, manual port-selection. Each button controls a port. LED Display: An LED display on the face of the PRO2 serves as a status monitor. An LED next to each direct-access port selector illuminates to indicate that the console currently controls the corresponding computer. As a port selector is pushed, the LED next to it will light up.
OVERVIEW available in both USB and PS/2 connector types.
OVERVIEW Side View of the PRO2: F1DA108T 5 1 2 3 FLASH DIP switch (may be located on the back in some models) 4 5 6 ON BANK ON BANK DIP switch (may be located on the back in some models) 1 2 3 4 FLASH
OVERVIEW Front View of the PRO2: F1DA108T LED for selected port identification AutoScan button 7-segment LED for selected BANK identification Manual BANK scroll buttons Direct-access port selector Back View of the PRO2: F1DA108T Console VGA Computer VGA port Computer USB port USB 04 USB 03 Console PS/2 mouse/keyboard ports Flash upgrade port Master Input/Slave Output Slave Input Computer PS/2 mouse/keyboard ports DC power jack 6
OVERVIEW Specifications Part No.: F1DA104T, F1DA108T & F1DA116T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity Daisy-Chain: Maximum of 16 KVM Switches Computer Connections Supported: 4 (F1DA104T) 8 (F1DA108T) 16 (F1DA116T) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be required) Max.
INSTALLATION Pre-Configuration Where to Place the PRO2: The enclosure of the PRO2 is designed for standalone or rack-mount configuration. The 8- and 16-port PRO2s are natively rack-mountable in standard 19-inch server racks. Rack-mount hardware is included with these switches for a study rack installation. An optional rack-mount kit (F1D005) is available for use with the 4-Port PRO2.
INSTALLATION Step-by-Step Installation Guide Cautions and Warnings: Before attempting to connect anything to the PRO2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the PRO2(s). Belkin Components is not responsible for damage caused in this way.
INSTALLATION Your PRO2 is now mounted securely into the bracket and you are ready to connect cables to the back of the unit. Note for Belkin PRO Series owners (F1D104-OSD, F1D108-OSD, F1D116-OSD): Installation for the PRO has changed. Please follow this installation manual completely to assure proper installation. Failure to do so may result in keyboard or mouse errors, and/or faulty operation. Single PRO2 Installation This section provides complete instructions for the hardware setup of a single PRO2.
INSTALLATION Connect the Computer: PS/2 Installation 1. Using an OmniView KVM Cable (Belkin part# F3X1105-XX or F3X1835-XX-GLD), plug in the male VGA connector to the VGA port on the computer. Connect the other end (the female connector) of the VGA cable to the back of the PRO2 labeled "VGA 01". 2. Connect the PS/2 keyboard and PS/2 mouse connectors of the cable to the keyboard and mouse ports on the computer.
INSTALLATION 1. Using a USB KVM Cable (Belkin part# F3X1962-XX or F3X1895-XX-GLD), plug the male VGA connector into the VGA port on the computer. Connect the other end (the female connector) of the VGA cable to the back of the PRO2 for the appropriate port you wish to connect to (for example, "VGA 02"). 2. Connect the USB cable's "A-type" connector to an available USB port on your USB computer.
INSTALLATION BANK DIP Switch Configuration Chart DIP SWITCH# BANK ADDRESS 1 2 3 4 5 ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF 6 ON BANK 00 MASTER (default) ON BANK 01 SLAVE ON BANK 02 SLAVE ON BANK 03 SLAVE ON BANK 04 SLAVE ON BANK 05 SLAVE ON BANK 06 SLAVE ON BANK 07 SLAVE OFF
INSTALLATION Installation Before You Begin: 1. Make sure that all computers are powered off and that each PRO2 has been assigned a unique BANK address. 2. Place Master and Slave switches in the desired location. Make sure all are turned off and unplugged from the power source. 3. Connect the Console monitor, keyboard, and mouse to the Console ports of the Master switch or Bank 00, as described previously in this installation guide. Connecting the Master Switch to the First Slave Switch: 4.
INSTALLATION Example of Daisy-Chain Configuration: Slave Input Master Input /Slave Output VGA VGA08 USB 08 VGA07 08 USB 07 07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 06 USB 05 05 04 USB 03 03 02 USB 01 01 Master unit cable 1 (BANK 00) Slave Input Master Input /Slave Output VGA VGA08 USB 08 VGA07 08 USB 07 07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 06 USB 05 05 04 USB 03 03 02 USB 01 01 Slave unit (B
USING YOUR PRO2 Powering up the Systems Once all cables have been connected, power up the computers that are attached to the PRO2. All computers can be powered on simultaneously. The PRO2 emulates both a mouse and keyboard on each port and allows your computer to boot normally. The computer connected to port “1” will be displayed on the monitor. Check to see that the keyboard, monitor, and mouse are working normally.
USING YOUR PRO2 Selecting a Computer Using Keyboard Hot Key Commands: Switch to the next or previous port with simple keyboard key sequences using the “Scroll Lock” key and either the up or down arrow keys. To send commands to the PRO2, the “Scroll Lock” key must be pressed twice within two seconds. The PRO2 will beep, confirming that it is in hot key mode. Next, press the up or down arrow keys, and the PRO2 will switch to either the prior port or the next port.
USING YOUR KVM SWITCH With a daisy-chain switch configuration, you can switch directly to any port on any BANK by pressing “Scroll Lock”, “Scroll Lock”, BANK address, and port number. For example, if you press “Scroll Lock”, “Scroll Lock”, “03”, “05”, the computer on BANK 03, Port 5 will become active. + + 3 + 5 AutoScan Mode: Pressing the AutoScan button on the PRO2 will activate the AutoScan function.
USING YOUR PRO2 first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 02. The “BANK – ” button will take you to the previous BANK. For example, when you are at BANK 02 and want to check computers in BANK 01. Pressing the “BANK – ” button will take you to BANK 01. As default, the first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 01.
USING YOUR PRO2 On-Screen Display Menu Control: To access the On-Screen Display (OSD) menu, press “Scroll Lock”, “Scroll Lock”, and the space bar. Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the PRO2, and does not affect your computers or software function in any way. The main OSD menu is shown below. It displays the current selected BANK. If you have only one PRO2, it will display “BANK 00”.
USING YOUR PRO2 AutoScan Time: Specifies the amount of time the PRO2 remains on a port before switching to the next port while in AutoScan mode. You may select different time intervals—7, 15, 30, or 60 seconds. Use the OSD to set the AutoScan time interval. OSD Display Time: Specifies the amount of time the OSD menu is displayed. Also specifies the amount of time the “Port Identification” tag displays on-screen after making a port selection. You may choose 7, 15, 30, or 60 seconds.
USING YOUR PRO2 Connecting Computers: 1. Connect a keyboard, monitor, and mouse to the computer you prepared for firmware update. It must run Windows 95, 98, or Me. 2. Connect the power adapter to the PRO2. Be sure that all connected computers are powered off at this moment. 3. Connect the custom flash cable (DB25 Male-to-RJ45; included with purchase). Connect one end of DB25 to your computer’s parallel port and the other end of RJ45 to the PRO2 flash upgrade jack.
BELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM Switches OmniView E Series. This series of desktop OmniView KVM Switches allows you to control two or four PS/2 computers from one Console and makes switching between computers more convenient. Designed for compatibility with your PS/2 platform, it reduces desktop clutter and provides a simple, reliable solution at a lower price point.
BELKIN KVM SWITCHES AND ACCESSORIES F1DS102P F1DS104P F1DS102T F1DS104T SOHO SOHO SOHO SOHO Series Series Series Series 2-Port 4-Port 2-Port 4-Port KVM KVM KVM KVM Switch Switch Switch Switch with Audio with Audio with Audio with Audio PS/2 PS/2 PS/2 PS/2 Only Only & USB & USB OmniView PRO2 Series. The OmniView PRO2 Series KVM Switches deliver reliability, performance, and centralized control necessary for today’s enterprise environment.
BELKIN KVM SWITCHES AND ACCESSORIES OmniView All-In-One KVM Cables OmniView All-In-One KVM Cables provide you with the quality connections necessary to set up your KVM solution. Each kit provides the proper cables and connectors to complete the installation of a Belkin OmniView KVM Switch. OmniView All-In-One KVM Cables feature sturdy construction, with strain-relief construction and PVC overmolding to prevent data loss.
BELKIN KVM SWITCHES AND ACCESSORIES OmniView Accessories and Adapters Belkin KVM technology includes various accessories and adapters to complete your KVM solution. The Adapter Series converts Mac, Sun, or USB keyboards, video, and mouse signals into PS/2 and VGA. F1D080—The OmniView PS/2 Mac Adapter™ converts a Macintosh® computer with a 4-pin ADB™ (Apple® Desktop Bus) and DB15 connector into a PS/2 keyboard, HDDB15 VGA monitor, and PS/2 mouse.
PRO2 SERIES FAQs Q: What operating systems does the PRO2 support? A: The PRO2 will support any operating system that runs on a PS/2 and USB platform. It will also work with non-USB Sun and Mac operating systems using the appropriate adapters (OmniView PS/2 Sun Adapter [F1D082], OmniView PS/2 Mac Adapter [F1D080]). Operating systems include, but are not limited to, DOS, Windows 95/98/2000/Me/NT/XP, Linux, and Mac OS.
PRO2 SERIES FAQs Q: How far can the computer be from the PRO2? A: When using PS/2 connections, the PRO2 can be up to 25 feet away from your computer. If your computer needs to be more than 25 feet (7.5 meters) from the PRO2, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using a standard CAT5 UTP cable. When using USB connection between your PRO2 and computer, we recommend that your computer be no more than 15 feet (5 meters) from the PRO2.
PRO2 SERIES FAQs Q: Does the PRO2 require an AC adapter? A: Yes, the PRO2 requires a 12-Volt DC, 1-Amp power adapter in order to function properly. Q: Can I use the PRO2 to switch video signals only? A: Yes, you may use the PRO2 to switch between video signals only without having to connect the keyboard and mouse. The keyboard and mouse should be connected directly to the computer that the video signal is taken from to ensure that your computer functions properly.
TROUBLESHOOTING General My computer does not boot when connected to the PRO2 but works fine when I connect the keyboard, video, and mouse directly to the computer. • Make sure that the keyboard and mouse cables are connected tightly between the PRO2 and the computer. • Check that the keyboard and mouse cables are not crossed. Video I am getting ghosting, shadowing, or fuzzy images on my monitor. • Check that all video cables are inserted properly.
TROUBLESHOOTING Keyboard The computer does not detect a keyboard and I get a keyboard error reported at boot up. • Check that the keyboard cable between the PRO2 and the computer is completely connected. Tighten any loose connections. • Try using a different keyboard. • Try connecting the computer to a different port. • If you are using the keyboard software that was included with your keyboard, uninstall it and then reinstall the standard Microsoft keyboard driver.
TROUBLESHOOTING The mouse is not detected at boot-up. • Check the cables and make sure that they are inserted correctly. The computer boots up, but the mouse does not work. • Make sure the mouse is plugged in properly. • Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this. • Try a different mouse. When I switch from one port to another, mouse movement is completely erratic. • Make sure you do not have more than one mouse driver installed.
TROUBLESHOOTING USB I am connecting my computer to the USB PRO2 via USB and my keyboard and mouse do not work. • Prior to connecting the USB PRO2, make sure that the HID USB driver is installed on each computer. (To install the HID USB driver, connect a USB mouse and USB keyboard to the computer. A Windows operating system should automatically install the drivers.) Some of the keys on my keyboard are not functioning properly when I use a Mac computer.
WARRANTY, FCC , CE, ICES STATEMENT FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the products: F1DA104T, F1DA108T, F1DA116T to which this declaration relates: Comply with Part 15 of the FCC Rules.
belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd.
