P73775-A-E Series-man.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 2 Table of Contents Overview . . . . . . . . . . . . . Feature Overview . . . . . Equipment Requirements Operating System . . . . . Unit Display Diagrams . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 2 OVERVIEW OVERVIEW OVERVIEW Equipment Requirements The Belkin OmniView E Series KVM Switch allows you to control up to four computers, depending on the model, with one keyboard, monitor, and mouse. OmniView E Series KVM Switches support PS/2 input devices (keyboard and mouse); VGA, SVGA, XGA, and XGA-II video; and PS/2 output computers.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 4 OVERVIEW Operating Systems OmniView E Series KVM Switches are for use on PS/2-based computers. Platforms: • Windows® 3.x/95/98/2000/Me/NT®/XP • DOS • Linux® • Novell® NetWare® 4.x/5.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 6 OVERVIEW OVERVIEW The Rear of the OmniView E Series KVM Switch: Computer VGA ports 4-Port Console VGA ports Computer PS/2 mouse/keyboard ports Console VGA ports 2-Port 2nd computer VGA port 1st computer VGA port Specifications Part No.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 8 INSTALLATION INSTALLATION Pre-Configuration Step-by-Step Installation Guide Where to Place the KVM Switch: The OmniView E Series KVM Switch is designed to sit on the desktop. Where you place the KVM Switch will be based on the location of your CPUs and the length of your cables. Cable Distance Requirements: For PS/2 computers: VGA signals are best retained when transmitted up to 25 feet (7.5m). Beyond 25 feet (7.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 10 INSTALLATION USING YOUR E SERIES KVM SWITCH CONNECT THE COMPUTER: Powering up the Systems 4. Connect the first computer’s VGA cable to the E Series KVM Switch. Using the VGA cable (Belkin Part# F3X1105-XX, F3X1835XX, or F2N209-XX), 2-Port connect the male end of the cable to the VGA port on the computer, 4-Port and the female end to the VGA port on the rear of the E Series KVM Switch labeled CPU1.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 12 USING YOUR E SERIES KVM SWITCH Selecting a Computer Using Keyboard Hot Key Commands You can conveniently change ports with the switch through a keyboard command sequence by using the [SCROLL LOCK] key and [UP], [DOWN] arrow keys. To send commands to the E Series KVM Switch, press the [SCROLL LOCK] key twice within two seconds. You will hear a beep for confirmation. Then you can press the [UP], [DOWN] arrow keys to switch between ports.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 14 BELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM Switches OmniView E Series. These KVM devices allow you to control two or four computers from one console and make switching between computers more convenient. Designed for compatibility with your PS/2 platform, they reduce desktop clutter and provide a simple, reliable solution at a lower price point.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 16 BELKIN KVM SWITCHES AND ACCESSORIES BELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM Cables OmniView Accessories and Adapters OmniView All-In-One Cable Kits provide you with the quality connections necessary to set up your KVM solution. Each kit provides all the cables and proper connectors to complete the installation of the Belkin OmniView Switch of your choice. All OmniView All-In-One Cable Kits offer full compatibility with Belkin KVM switches.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 18 FAQ E SERIES FAQ E SERIES FAQ E SERIES support is ideal for graphic artists and designers who depend on high-quality video. Q: What operating systems does the E Series KVM Switch support? A: The E Series KVM Switch will support any operating system that runs on a PS/2 platform. It will also work with Sun and Mac operating systems using the appropriate adapters (Belkin OmniView™ PS/2 SUN Adapter™ F1D082, OmniView™ PS/2 MAC Adapter™ (F1D080).
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 20 FAQ E SERIES Q: Can I use the E Series KVM Switch to switch video signals only? A: Yes, you may use the E Series KVM Switch to switch between video signals only, without having to connect the keyboard and mouse. Keyboard and mouse should be connected directly to the computer that the video signal is taken from to insure that your computer functions properly.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 22 TROUBLESHOOTING • If you are using the keyboard software that was included with your keyboard, uninstall it and install the standard Microsoft keyboard driver. MOUSE Mouse is lost when I switch to a different channel. • Check that the mouse you are using is connected properly to the console of the KVM switch. • If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver.
P73775-A-E Series-man.qxd 3/5/02 4:53 PM Page 24 Warranty, FCC, CE Statement FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F1DB102P F1DB104P to which this declaration relates: Complies with Part 15 of the FCC Rules.
P73775-A-E Series-man.