Package Contents 15", 17", or 19" LCD Rack Console VGA, PS/2 Cable Kit Bracket Kit Bracket Screws IEC Power Cable Quick Installation Guide Keys Introduction This booklet will guide you through the basic steps needed to install the 15", 17", or 19" LCD Rack Console.
Specifications Material Heavy-duty steel Power uto-switching A 100 to 240VAC 50 to 60Hz 48 watts Net Weight 9.0 lbs. (13.2kg.) [F1DC100P-SR] 2 31.0 lbs. (14.1kg.) [F1DC101P-SR] 34.7 lbs. (15.7kg.) [F1DC102P-SR] Unit Dimensions 9 (W) x 21.7 (D) x 1.70 (H) in. 1 (482.6 x 551.2 x 43.18mm) [F1DC100P-SR and F1DC101P-SR] 9 (W) x 23.6 (D) x 1.70 (H) in. 1 (482.6 x 599.4 x 43.18mm) [F1DC102P-SR] Minimum Rack-Mount Depth 21.5 in. (546.
Pixel Pitch .297mm [F1DC100P-SR] 0 0.264mm [F1DC101P-SR] 0.294mm [F1DC102P-SR] Panel Color 6.0 million display colors [F1DC100P-SR] 1 16.2 million display colors [F1DC101P-SR] 16.7 million display colors [F1DC102P-SR] Response Time ising 5ms, Falling 13ms [F1DC100P-SR] R Rising 3ms, Falling 10ms [F1DC101P-SR] Rising 1.3ms, Falling 3.
Installation Step 1: Place the console inside the rack. Step 2: Mount the front brackets to the rack. Step 3: Connect the rear brackets to the Console with the provided screws. Step 4: Adjust the length of the rack-mount brackets.
Step 5: Lock the adjustable brackets by tightening the rear screws. Step 6: Connect the IEC power cable to an active power outlet and power up the Console.
Connecting the KVM Switch or Server Step 1 Make sure your KVM switch or server is powered OFF. Step 2 sing the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2 U connectors to the back of the Console. (Refer to diagrams below.) Step 3 onnect the other end of the Cable Kit to the console monitor, keyboard, C and mouse ports on your KVM switch or server. (Refer to diagrams below.) Step 4 Power ON the Console. Step 5 Power ON the KVM switch or server connected to the Console.
You are now ready to use your LCD Rack Console. The Console offers two power on/off methods: • a power switch on the rear, and • an LCD power-save (with drawer closure).
Troubleshooting My Console doesn’t appear to be on. Make sure that the power switch located at the front of the keyboard drawer is “on” and that the power cable is connected properly. What is the maximum video resolution that the LCD panel supports? The LCD panel supports a resolution of up to 1024x768 (F1DC100P-SR) and 1280x1024 (F1DC101P-SR and F1DC102P-SR). Do I have to install any software to use the Console? No, the Console does not require any drivers or software to be installed in your computers.
15", 17", or 19" LCD Rack Console Belkin Tech Support US: 8 00-223-5546, ext. 2263 310-898-1100, ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support Belkin International, Inc. 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin Ltd.
15", 17", or 19" LCD Rack Console Start Here Quick Installation Guide F1DC100P-SR F1DC101P-SR F1DC102P-SR
