Package Contents 17" Dual-Rail LCD Rack Console IEC Power Cable Side-Rail Kit Quick Installation Guide VGA, PS/2 Cable Kit Keys Introduction This booklet will guide you through the basic steps needed to install the 17” LCD Rack Console with Dual-Rail Technology.
Specifications Material Heavy-duty steel Power uto-switching A 100 to 240VAC 50 to 60Hz 48 watts Net Weight 32.6 lbs. (14.8kg.) Unit Dimensions 9 (W) x 26.3 (D) x 1.70 (H) in. (483.2 x 668.51 x 1 43.18mm) Minimum Rack-Mount Depth 26 in. (660.4mm) Maximum Rack-Mount Depth 36 in. (914.4mm) Display Type 17" TFT/LCD active-matrix color Resolution Up to 1280x1024 Contrast Ratio 450:1 Brightness 250 cd/m2 typical Pixel Pitch 0.264mm x 0.
Panel Color 16.
Installation Step 1 Place the console inside the rack. Step 2 Mount the front brackets to the rack. Step 3 Slide the side rails onto the mounting studs.
Step 4 Mount the side rails to the rear of the rack. Step 5 Connect the IEC power cable to an active power outlet and power up the Console.
Connecting the KVM Switch or Server Step 1 Make sure your KVM switch or server is powered OFF. Step 2 sing the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2 U connectors to the back of the Console. (Refer to diagrams below.) Step 3 onnect the other end of the Cable Kit to the console monitor, keyboard, and C mouse ports on your KVM switch or server. (Refer to diagrams below.) Step 4 Power ON the Console. Step 5 Power ON the KVM switch or server connected to the Console.
You are now ready to use your LCD Rack Console. Console Console KVM Switch Server The Console offers two power on/off methods: • a power button on the LCD front-panel console, and • an LCD power-save (with drawer closure).
Troubleshooting My Console doesn’t appear to be on. Make sure that the power switch located at the front of the keyboard drawer is “on” and that the power cable is connected properly. What is the maximum video resolution that the LCD panel supports? The LCD panel supports a resolution of up to 1280x1024. Do I have to install any software to use the Console? No, the Console does not require any drivers or software to be installed in your computers.
Titan 17” Dual-Rail LCD Rack Console Start Here Quick Installation Guide F1DC101C-US
Titan 17” Dual-Rail LCD Rack Console Belkin Tech Support US: 8 00-223-5546, ext. 2263 310-898-1100, ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support Belkin International, Inc. 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. 4 Pioneer Avenue Tuggerah Business Park Tuggerah, NSW 2259, Australia +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax Belkin B.V.
