P74416ea_F1DL102P_QIG.
P74416ea_F1DL102P_QIG.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 2 1 Introduction This sheet will guide you through the basic steps needed to install the 2Port KVM Switch with Audio Support and Built-In Cabling (the Switch). If you have any problems during installation, please refer to the User Manual.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:51 PM Page 4 Connecting the Speakers and Mic to the Switch 1. Connect your speaker cable to the green speaker jack on the front panel of your Switch. 2. Connect your mic cable to the pink mic jack on the front panel of your Switch. 3 Connecting Computers to the Switch 1. Using the attached cables, take the VGA cable and connect it to the VGA port on the first computer. 2. Connect the PS/2 keyboard KVM cable to the keyboard port on the computer. 3.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 6 Fr Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • USA Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 2 1 Introduction Ce document vous guidera à travers les étapes élémentaires nécessaires à l’installation du switch KVM 2 Ports avec Audio et Câblage intégré (le Switch). Si vous rencontrez des problèmes lors de l’installation, reportez-vous au manuel de l’utilisateur.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:51 PM Page 4 Branchement des haut-parleurs et du microphone sur le Switch 1. Branchez le câble des haut-parleurs dans la prise pour haut-parleurs verte située à l’avant de votre Switch. 2. Branchez le câble du microphone dans la prise pour microphone rose située à l’avant de votre Switch. 3 Branchement des ordinateurs sur le Switch 1. En utilisant les câbles intégrés, branchez l’extrémité mâle du câble VGA sur le port VGA du premier ordinateur. 2.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 6 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • États-Unis Tél : +1 310 898 1100 Fax : +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • Royaume Uni Tél : +44 (0) 1933 35 2000 Fax : +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 2 1 Einführung Dieses Informationsblatt wird Sie bei den Grundschritten begleiten, die erforderlich sind, um den 2-Port KVM-Switch mit Audiounterstützung und eingebauter Verkabelung zu installieren. Wenn Sie Probleme bei der Installation haben, benutzen Sie bitte das Benutzerhandbuch.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:51 PM Page 4 Verbindung der Lautsprecher und des Mikrophons mit dem Switch 1. Schließen Sie Ihr Lautsprecherkabel an der grünen Lautsprecherbuchse an der Vorderseite Ihres Switch an. 2. Schließen Sie Ihr Mikrophonkabel an der rosa Mikrophonbuchse an der Vorderseite Ihres Switch an 3 Anschließen von Computern an den Switch 1. Benutzen Sie die beigefügten Kabel. Nehmen Sie das VGA-Kabel und schließen Sie es am VGA-Anschluss an Ihrem ersten Computer an. 2.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 6 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • USA Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • Großbritannien Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:51 PM Page 2 1 Inleiding Deze documentatie begeleidt u bij de belangrijkste stappen die genomen moeten worden bij de installatie van de 2-poorts KVM-switch met audioondersteuning en ingebouwde bekabeling (de switch). Mocht u tijdens de installatie toch op problemen stuiten, raadpleeg dan de handleiding.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:51 PM Page 4 De luidsprekers en microfoon aansluiten op de switch 1. Sluit uw luidsprekerkabel aan op de luidsprekeraansluiting die zich bevindt aan de voorzijde van uw switch. 2. Sluit uw microfoonkabel aan op de roze microfoonaansluiting die zich bevindt aan de voorzijde van uw switch. 3 Computers aansluiten op de switch 1. Maak gebruik van de aangesloten kabels. Neem de VGA-kabel en sluit deze aan op de VGA-poort van de eerste computer 2.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 6 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • USA Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • Verenigd Koninkrijk Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 2 1 Introducción Este folleto le guiará a través de los pasos básicos necesarios para instalar el conmutador KVM (teclado/pantalla/ratón) de 2 puertos con soporte de audio y cableado incorporado (el conmutador). Si se presentase algún problema durante la instalación, consulte el manual del usuario.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:52 PM Page 4 Cómo conectar los altavoces y el micro al conmutador 1. Conecte el cable del altavoz al enchufe verde del panel frontal del conmutador. 2. Conecte el cable al enchufe rosa del micro del panel frontal del conmutador. 3 Cómo conectar los ordenadores al conmutador 1. Utilizando los cables conectados, conecte el cable VGA al puerto VGA del primer ordenador. 2. Conecte el cable KVM del teclado PS/2 al puerto del teclado de su ordenador. 3.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 6 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • EE.UU Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • Reino Unido Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 2 1 Introduzione Le informazioni contenute in questa pagina vi guideranno passo passo all’installazione dello switch KVM a 2 porte con supporto audio e cablaggio incorporato. Per qualsiasi problema nel corso dell’installazione, consultare il Manuale Utente.
P74416ea_F1DL102P_QIG.qxd 2 2/24/04 2:52 PM Page 4 Collegare gli speaker e il microfono allo switch 1. Collegare il cavo per lo speaker al rispettivo jack verde, situato nel pannello anteriore dello switch. 2. Collegare il cavo del microfono al rispettivo jack rosa, situato nel pannello anteriore dello switch. 3 Collegamento dei computer allo switch 1. Usando i cavi già collegati, prendere il cavo VGA e collegarlo alla porta VGA del primo computer. 2.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 6 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • USA Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • Regno Unito Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.
P74416ea_F1DL102P_QIG.qxd 2/24/04 2:52 PM Page 8 Belkin Corporation 5501 West Walnut Street Compton • CA • 90220-5221 • USA Tel: +1 310 898 1100 Fax: +1 310 898 1111 Belkin Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B.V.