User manual

12
9
Advanced Secure Keyboard/Mouse (KM) Switch
SECTIONSTable of Contents 1 2 3 4 5 6 7 8SECTIONSTable of Contents 1 2 3 4 5 6 7 8
9
OVERVIEW
SECTIONSTable of Contents 1 2 3 4 5 6 7 82
Notes:
• Only DCU devices are to be connected to the KM Switch DCU port.
• Only the following DCU cables are supported:
Belkin DCU Cable Part Numbers
F1D9026-06 (CABLE, RJ14, 6P6C, 26AWG, UNSHIELDED, DCU CABLE, 6)
F1D9026-50 (CABLE, RJ14, 6P6C, 26AWG, UNSHIELDED, DCU CABLE,
50) and higher LAN cable
Important:
For DCU usage, do not use cables other than the DCU cables listed
above. Do not connect cables to a LAN switch, PoE power injector or
other LAN ports. This may result in immediate permanent damage to
the Switch or to the DCU.
Programming Cable
In order to use the Secure KM Switch KMC Creator configuration tool,
it is necessary to use Belkin’s special USB configuration cable [Belkin
part number 6000-00071 (USB A TO A PROGRAMMING CABLE)]
included with the Belkin Secure KM Switch.