Server User Manual

6
Product Overview
Specifications
Note:Specifications are subject to change without notice.
Feature Specification
General
LEDs
Power (red)
Ready (green, normally blinking),
Link/Act/10/100Mbps (Ethernet orange: 10Mbps, green: 100Mbps)
Activity (blue for each serial port)
Push button for reset, or restore to default
RTC (real-time clock)
SerialInterface
16-port (F1DP116S)
Serial-port mode (RS232)
Serial connector (RJ45)
Baud rate (300 to 115200)
Flow control (None, RTS/CTS, Xon/Xoff)
LANInterface
RJ45 connector
IEEE 802.3 - 10/100BaseT
Auto-detecting, full/half-duplex selectable
PortFunction
OperationModes
Console server
Terminal server
Dial-in modem
Serial-to-serial (on port 16 only)
Protocols
TCP, UDP, IP, ARP, ICMP, HTTP/HTTPS, Telnet, DHCP/BOOTP, PPP,
SMTP, DNS, NTP
Dynamic DNS
ProtocolRelative
Function
TCP inactivity time (TCP keep-alive time)
Serial inactivity time
Port monitoring
Security
Password access
IP filtering
SSHv2
HTTPS/SSL
Authentication
Local user database
PAP/CHAP (for modem dial-in)
RADIUS
Management
Local console (menu or command line)
SSH, telnet
Web pages (HTTP/HTTPS)
Firmware upgrade via web interface
Port buffering and logging
Full-featured system status display
Power and
Environment
AC Input (100 ~ 240VAC, 50 ~ 60Hz)
Operating Temperature: -10° to 80° C
Storage Temperature: -20° to 85° C
Humidity: 0–90% non-condensing
Certications
CE, FCC
UL
Mechanical
1U 19˝ rack-mount
Dimensions (cm): 43.2 x 18.0 x 4.2