Server User Manual

Network Settings

You can conﬁgure the network IP settings via VT-100 or web interface. This section

describes conﬁguration through the web interface.

IP Conﬁguration

The Console Server requires a valid IP address to operate within the user’s network

environment. If the IP address is not readily available, contact the system administrator to

obtain a valid IP address for the Console Server.

There are two types of IP assignments you can choose from:

• StaticIP

• DHCP(DynamicHostCongurationProtocol)

The unit ships with DHCP set to default. If no DHCP server is found on your network, the

Console Server will boot with the following static IP address: 192.168.2.156.

The new IP conﬁguration setting can be saved by clicking “Save & Reboot”.