Owner manual

ManualsBrandsBelkin ManualsComputer AccessoriesF1DS104P

Self Help Guide

TSG-UK-1-001 | www.belkin.com | Page 1 of 1

Self Help Guide

IMPORTANT!

This Guide refers to the

following Products:

SOHO KVM Firmware Update Instructions

F1DS104P

Synopsis:

Please read the following carefully;

Requirements:

This guide will assist you in updating the firmware

of your Belkin OmniView SOHO KVM Switch.

Please be advised that firmware updates tend to

be to resolve specific issues and if there is any

doubt if the firmware will resolve your issue you

should check with Technical Support.

To perform the Firmware Upgrade successfully

you will need the following equipment;

• SOHO KVM

• 9 V DC 600mA KVM Power Supply (optional)

• RJ45-DB25 Flash Update Cable (supplied)

• PC with Win 98, ME,2000 or XP and Parallel Port

• Firmware Update File

• NTPDA Update

• 1 KVM Cable Kit (to connect to PC)

You will also need to ensure that any Firewall or

Anti-Virus Software is disabled on the Computer

from which you will be upgrading the Firmware.

F1DS104T

TSG-UK-2-003 | www.belkin.com | Page 1 of 4

Summary of content (4 pages)

PAGE 1
Self Help Guide ® IMPORTANT! SOHO KVM Firmware Update Instructions This Guide refers to the following Products: Please read the following carefully; Synopsis: This guide will assist you in updating the firmware of your Belkin OmniView SOHO KVM Switch. Please be advised that firmware updates tend to be to resolve specific issues and if there is any doubt if the firmware will resolve your issue you should check with Technical Support.
PAGE 2
Self Help Guide ® SOHO KVM Firmware Update Instructions Step 1 Before proceeding with the Firmware Update you will need to ensure that the Computer being used for the update process is ready. If you are running Windows 2000 or XP you will need to install an NT Direct Port Access Update prior to running the Flash Update. The NTPDA.exe file Update Utility can be downloaded from the same location as the Firmware Update files. Once downloaded, the file should be unzipped and the ‘Setup.
PAGE 3
Self Help Guide ® Step 4 Plug the supplied Firmware Update Cable in to the (DB25) Parallel Port of a stand-alone Text Computer (i.e. one that is not currently connected to and controlled by the KVM) and connect the other end of the Cable into the (RJ45) Firmware Upgrade Port of the KVM. Step 5 Now that everything is setup the KVM can be flash upgraded. Double click the Icon of the Firmware Update File that you downloaded. Once open, click on the button in the KVM Firmware Update Window.
PAGE 4
Self Help Guide ® Step 5 Providing the Flash Upgrade is being performed successfully, you should see a Text Window with a Progress Bar similar to that shown below. Step 6 Once the Firmware Upgrade has been successfully completed an extra Window will appear with a message to this effect. Simply close this Window. Next, unplug both the Flash Update Cable from both KVM and the Computer, followed by the power cable to the KVM.