Printer User Manual

Installation Procedure

If the DHCP server is unavailable or not found, the user

will be prompted to configure the TCP/IP settings of the

Print Server manually by clicking “Yes” on the screen

below. Clicking “No” will make the Print Server search for

the IP address from a DHCP server on the network.

Select “Yes” to configure the TCP/IP settings in the “Manual

IP” section. The default TCP/IP-address information in

the Manual-IP mode will be what is shown below.

IP Address: 192.168.2.253

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.2.1

DNS: 0.0.0.0

Make sure that the TCP/IP information configured here is

correct and matches your network settings. Click “Next”

to continue on to step 3 in the installation process.

section