P73240_F5F315-T_US_man.
P73240_F5F315-T_US_man.qxd 9/24/03 3:21 PM To Test Straight Twisted Pair (Shielded or Unshielded) Cables 1. Plug one end of the cable into the modular jack on the master unit and the other end into the modular jack of the remote terminator. 2. As soon as the Power is turned on, the LEDs on the remote terminator will start to scan each pair one by one. If the cable wiring is intact, the LEDs corresponding to each pair will illuminate green.
P73240_F5F315-T_US_man.qxd 9/24/03 3:21 PM To Test Coax Cable (BNC) 1. Plug one end of cable to the BNC socket of master unit and the other end to the BNC terminator included with the F4F315-T. 2. Push the Power button to the ON position on the master unit. If the BNC LED illuminates, the cable is bad. 3. If the cable passes step 2, then push the BNC test button on the side of the master unit. The BNC LED will illuminate green if the cable is good. If it illuminates red, the cable is bad.
P73240_F5F315-T_US_man.qxd 9/24/03 3:21 PM belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • UK Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 ©1999 Belkin Components. All Rights Reserved.
