Powerline AV+ Networking Adapter User Manual PM01611 F5D4075
Table of Contents Table of Contents sections 1 1 Introduction....................................................................................1 Features 2 Product Specifications 2 System Requirements 3 Package Contents 3 2 Installing and Setting Up the Adapters......................................4 3 Configuration..................................................................................5 4 Information......................................................................................
Introduction Table of Contents sections 1 2 3 4 Thank you for purchasing the Powerline AV+ Networking Adapter (the Adapter). Most people don’t enjoy buying long and expensive Ethernet cables or pulling the cables from one place to another, but the Adapter offers one of the easiest ways to enjoy home or small-business networking. Users can now experience a total network solution with the Adapter. The Powerline AV+ Networking Adapter operates on the HomePlug® Powerline Specification 2.
Introduction Table of Contents sections 1 2 3 Features Product Specifications • Up to 200Mbps* bandwidth over standard home power lines Computer Interface: IEEE 802.3/802.3u • HomePlug signal easily passes through circuit breaker • 128-bit DES encryption ensures data security Operating Temperature: 32–104 degrees F (0–40 degrees C) • Encryption completed by hardware, without sacrifice to bandwidth • Includes 3 IEEE 802.
Introduction Table of Contents sections Security LED Blinking Blue Solid Blue Double Flash 1 2 Package Contents Encryption setting up Encryption setup successful Fail in encryption Powerline Link LED Blinking Color Blue Color Magenta Color Amber Off Powerline data transmitting or receiving Link rate excellent: greater than 60Mbps Link rate normal: 30–60Mbps Link rate low: 0–30Mbps No activity Ethernet Link LEDs Solid Blue Off 10/100Mbps port linked No Ethernet link System Requirements • At leas
Installing and Setting Up the Adapters Table of Contents sections 1 2 3 4 Overview Hardware Setup Installation of the Powerline AV+ Networking Adapter takes only seconds and does not require setting up long wires throughout the house. Simply plug the units directly into any available wall outlet and connect to any device with an Ethernet port. Users have the option to randomly change the security password for their powerline network. 1.
Configuration Table of Contents sections 1 2 3 4 Overview Changing the Network Password The Adapter uses 128-bit AES encryption to block access from the outside. By default, the protection is enabled. However, it is recommended that you change the default network password with the “Encryption” button located on the units. 1. With both Adapters plugged into the wall, press the “Encryption” button on the first unit for 10 seconds. The password on this Adapter has now been changed to a random value.
Configuration Table of Contents sections 1 2 Adding Another Adapter to the Network 4 Technical Support You can find technical support information at www.belkin.com/support or www.belkin.com. 1. If the default network password has been changed, a new Adapter will have to load the new password before it can join the network. 2. Press the “Encryption” button on an encrypted unit for more than 0.5 seconds, but less than three seconds. 3.
Information Table of Contents sections 1 2 FCC Statement 4 reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver.
Information Table of Contents sections 1 2 Belkin International, Inc., Limited 1-Year Product Warranty 4 What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Information Table of Contents sections 1 2 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. 4 IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. HomePlug is a trademark of the HomePlug Alliance, registered in the U.S. and other countries.
