User Guide

CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER
14
4.3 When the transfer is complete, the Wizard will tell you that it is done and
may reboot (restart) the Router.
4.4 When configuration is complete, the Wizard will tell you “Router Setup
Complete” and it will move to the next step.
4.5 Checking Internet
The Wizard will now check for an Internet connection. This can take a few
minutes. The Wizard may not detect a connection right away. If not, it will retry
a number of times. The “Connected” light on the front panel of the Router will
flash during this time. Please be patient through this process. If at the end of
this process the Wizard cannot connect to the Internet, use the Troubleshooting