User manual

CONNECTING AND CONFIGURING YOUR CABLE/DSL ROUTER

IMPORTANT: Run the Easy Install Wizard from the computer

that is directly connected to the cable or DSL modem.

DO NOT CONNECT THE ROUTER AT THIS TIME.

Step 1: Run the Easy Install Wizard Software

1.1 Shut down any programs that are running on your computer at this time.

2.2 Make sure you have the following items at the computer that is now

directly connected to the cable or DSL modem. DO NOT CONNECT THE

ROUTER AT THIS TIME.

• The Easy Install Wizard CD-ROM

• The Router

• The Router power supply

• Category 5 networking cable

• This User Manual

1.3 Turn off any firewall or Internet connection sharing software on

your computer.

1.4 Insert the Easy Install Wizard software CD into your CD–ROM Drive. The

Easy Install Wizard screen will automatically appear on your screen within

15 seconds. If it does not, select your CD-ROM drive from “My Computer”

and double-click on the file named “Setup” on the CD-ROM.

Step 2: Follow the Easy Install Wizard to Complete the Installation

P74122_F5D6231-4_man.qxd 11/6/02 1:03 PM Page 10