User manual

KNOWING YOUR BELKIN ROUTER

The Router has been designed to be placed on a desktop vertically or

horizontally, or it may be mounted to a wall. The slim design minimizes the

desktop space required when placed vertically. All of the cables exit from the rear

of the Router for better organization and utility. The LED indicators are easily

visible on the front of the Router to provide you with information about network

activity and status.

1. Power/Ready LED

When you apply power to the Router or restart it, a short period of time

elapses while the Router boots up. During this time, the “Power/Ready”

LED blinks. When the Router has completely booted up, the Power/Ready

LED becomes a SOLID light, indicating the Router is ready for use.

OFF Router is OFF

Blinking Green Router is Booting Up

Solid Green Router is Ready

2. Wireless Network-Ready LED

OFF Wireless Network is OFF

Solid Green Wireless Network is Ready

3. LAN Port-Status LEDs

These LEDs are labeled 1–4 and correspond to the numbered ports on the rear

of the Router. When a computer is properly connected to one of the LAN ports

on the rear of the Router, the LED will light. GREEN means a 10Base-T device

is connected, AMBER means a 100Base-Tx device is connected. When

information is being sent over the port, the LED blinks rapidly.

OFF No Device is Linked to the Port

Green 10Base-T Device Connected

Orange 100Base-Tx Device Connected

Blinking (Orange or Green) Port Activity

P74122_F5D6231-4_man.qxd 11/6/02 1:03 PM Page 4