Network Router User's Manual

15
Connecting and Configuring Your Router
15
section
2
1
3
4
5
6
7
8
9
10
11
12
and working at the time of installation. If it is not, you must use the
Alternate Setup Method section of this manual to configure your
Router. Additionally, if you are using an operating system other than
Windows 98SE, Me, 2000, or XP, you must set up the Router using
the Alternate Setup Method section of this manual.
IMPORTANT: Run the Easy Install Wizard software from the
computer that is directly connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT THIS TIME.
Step 1 Run the Easy Install Wizard Software
1.
Shut down any programs that are running on your computer at
this time.
2. Make sure you have the following items at the computer that is
now directly connected to the cable or DSL modem. DO NOT
CONNECT THE ROUTER AT THIS TIME.
Quick Installation Guide
The Easy Install Wizard CD-ROM
The Router
The Router power supply
RJ45 Ethernet networking cable
This User Manual
3. Turn off any firewall or Internet connection sharing software on
your computer.
4. Insert the Easy Install Wizard software CD into your CDROM
drive. The Installation Menu will automatically appear on your
screen within 15 seconds. If it does not, select your CD-ROM
drive from My Computer and double-click on the file named
Start.exe on the CD-ROM.