Network Router User's Manual

33
Configuring and Using the USB Print Server
33
section
2
1
3
4
5
6
7
8
9
10
11
12
7. At the prompt, type “put”, followed by the file path and file
name, followed by the printer number (for example, “put c:\
example printer1”).
8. The file will be sent to the Print Server. When the transfer is
complete, another prompt will appear. If finished, type “quit” and
press “Enter” to end the FTP session. Then, close the “Command
Prompt” window.
Note: FTP Printing by default is enabled in the Print Server. It can be
disabled using the Router’s Web-Based Setup Interface. See page 29
for details.