User guide

Alternate Setup Method

3938

Setting your Connection Type if You Are a Telstra

BigPond User

Your user name and password are provided to you by Telstra BigPond.

Enter this information below. Choosing your state from the drop-down

menu (6) will automatically fill in your login server IP address. If your

manually enter the login server IP address by placing a check in the

box next to “User Decide Login Server Manually” (4) and type in the

address next to “Login Server” (5). When you have entered all of your

information, click “Apply Changes” (7). After you apply the changes,

the Internet Status indicator will read “Connection OK” if your Router

is set up properly.

1. Select your State

Select your state from the drop-down menu (6). The “Login

Server” box will automatically be filled in with an IP address.

If for some reason this address does not match the address

that Telstra has given, you can manually enter the login server

address. See “User Decide Login Server Manually” (4).

2. User Name

Provided by your ISP. Type in your user name here.

(1)

(2)

(3)

(4)

(5)

(7)

(6)