Floppy Drive Kit User Manual

ManualsBrandsBelkin ManualsComputer HardwareF5U099

P74065 F5U099

Belkin Floppy Drive Kit

User Manual

P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page a

Summary of content (13 pages)

PAGE 1
P74065-F5U099-man_6-02.
PAGE 2
P74065-F5U099-man_6-02.
PAGE 3
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page c TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . System Requirements . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . Configuring the Floppy Disk Drive Troubleshooting . . . . . . . . . . . . . Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
P74065-F5U099-man_6-02.
PAGE 5
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 1 INTRODUCTION Thank you for purchasing the Belkin Floppy Drive Kit. The Kit provides a quick and easy way to add a floppy disk drive to your computer. The floppy drive installs directly into any available 3.5-inch drive bay on your computer. If a 3.5-inch drive bay is unavailable, simply use the provided adapter to convert the floppy disk drive for use in a 5.25-inch drive bay.
PAGE 6
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 2 FEATURES • 3.5-inch form factor • 5.
PAGE 7
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 3 SYSTEM REQUIREMENTS Make sure your computer is IBM® PC-compatible with the following minimum system requirements: • 486DX4 -100MHz CPU or higher • One available FDD controller (check your computer system manual for location of the FDD controller) • DOS environment or Windows 95 through XP Package Contents • 3.5-inch floppy disk drive • 5.
PAGE 8
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 4 INSTALLATION To install the Floppy Drive Kit, please follow below steps: 1. Unplug your computer. 2. Remove the cover from your computer. Refer to your computer system manual for instructions. 3. If you are replacing a current floppy drive, pay close attention to the cables that are connected to the floppy drive. You will use the same cables to connect your new Belkin floppy drive. 4.
PAGE 9
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 5 CONFIGURING THE FLOPPY DISK DRIVE Your floppy disk drive can be configured as either “drive A” or “drive B” depending on how the floppy interface cable is connected. 1. To configure as drive A, connect your floppy drive to connector (A). 2. To configure as drive B, connect your floppy drive to connector (B). See Fig. 2. Fig.
PAGE 10
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 6 TROUBLESHOOTING Drive activity LED does not light when attempting a read or write data. Make sure that the interface cable and power cables are properly connected. Drive activity LED lights as soon as power is applied to computer, and stays lit. The ribbon cable may be reversed. Check orientation of Pin# 1. Invalid media or “Track 00 bad” message when attempting to format media. Make sure you format your floppy disk media to the correct capacity.
PAGE 11
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 7 INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F5U099 to which this declaration relates: Complies with Part 15 of the FCC Rules.
PAGE 12
P74065-F5U099-man_6-02.
PAGE 13
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 9 Tech Support US: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 310.604.2089 (fax) techsupp@belkin.com Europe: 00 800 223 55 460 eurosupport@belkin.com Australia: 1800 666 040 Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park Shipton Way • Rushden • NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V.