Wireless Keyboard and Optical Mouse Bundle Enjoy the freedom of wireless optical precision User Manual F8E832-BNDL
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Compatible Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Quick Installation Guide for PS/2 Connection . . . . . . . . . . . . . .3 Quick Installation Guide for USB Connection . . . . . . . . . . . . . . .
INTRODUCTION Congratulations and thank you for purchasing the Wireless Keyboard and Optical Mouse bundle from Belkin. We appreciate your business and are sure you will enjoy years of reliable use with these high-quality, input devices. Please review this entire User Manual so you can be sure to get the most reliable performance from your new equipment.
INTRODUCTION Compatible Equipment Works with all PCs that are compatible with IBM® and equipped with USB or PS/2 interface NOTE: Use of these products on a desk made of iron, or other metal, will negatively impact the operation of your Wireless Keyboard and Mouse.
QUICK INSTALLATION GUIDE FOR PS/2 CONNECTION 1. Be sure that your computer is powered off. 2. Connect the receiver to your computer’s PS/2 port. The receiver has a 2-head connector for the Keyboard and Mouse connections (purple is for the Keyboard and the USB connection; the green is for the Mouse). There is also an illustration on the top connector to identify them. If your computer does not use the same color scheme, match the plug with the illustration next to the port. 3.
QUICK INSTALLATION GUIDE FOR USB CONNECTION 1. Be sure that your computer is turned on. If you are running Windows 98, Me, or 2000, you will need to keep your old keyboard and mouse connected for installation. 2. Connect only the receiver to your computer through the USB port. Do not connect the purple PS/2 connection. It is not needed in a USB environment. Note: When connecting the USB cable to your computer, Windows will start a New Hardware Wizard.
SOFTWARE INSTALLATION FOR WINDOWS 98, ME, 2000, AND XP Note: The Keyboard and Mouse should now be functioning. If they are not, repeat the setup instructions and refer to the “Troubleshooting” section for help. When the Mouse and Keyboard are operational, the software can be installed. Warning: It is recommended that you uninstall any previously installed keyboard and mouse software prior to installing your new Belkin software. 1. Be sure your computer is powered on. 2.
USB-PS/2 STANDARD KEYBOARD HOT KEY FUNCTIONS My Documents Launch Microsoft My Document. My Picture Launch Microsoft My Picture (Note: This function does not work in Windows 98.) My Music Launch Microsoft My Music (Note: This function does not work in Windows 98 or 2000.) Play/Pause Start and stop the playback of your audio and video applications. Stop Volume Down Decrease your system volume. Volume Mute Mute your system volume.
TROUBLESHOOTING The Keyboard and/or Mouse is/are not detected or do not work after installation. • Make sure the receiver cables are plugged into either the computer’s PS/2 port or a USB port. If you are connecting via PS/2, make sure that both plugs are being used (purple keyboard connection and the USB connection with the green PS/2 adapter). If you are connecting it via USB, be sure to connect the USB side only.
TROUBLESHOOTING • Make sure you have properly established communication/ synchronization between the receiver and the Mouse and Keyboard. • If the Keyboard and/or Mouse are not working, make sure that the LED on the Keyboard and/or Mouse start flashing when you push any of the Keyboard keys, Mouse buttons, or move the Mouse. If the LED does not flash, check to make sure you have installed the batteries correctly.
UNINSTALLATION PROCESS FOR WINDOWS 98, ME, 2000, AND XP 1. Select “Setting”. 2. Select “Control Panel”. 3. Select “Add/Remove Programs”. 4. Select “Belkin Wireless Driver,” then click on “Add Remove”. 5. You will be asked if you are sure if you want to remove the selected application and all of its components. Click on “Yes”. The uninstall process will begin. Follow the on-screen instructions to complete the process.
INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F8E832-BNDL to which this declaration relates, complies with Part 15 of the FCC Rules.
INFORMATION Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Components may void the users authority to operate the equipment. Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime.
INFORMATION Canada- Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. Europe-European Union Notice Radio products with the CE 0560 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community.
INFORMATION Belkin Components Limited Lifetime Product Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.
Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin, Ltd.
