User manual

Stereo/Mono Selection
Stereo/Mono Selection






Transmitting music in stereo generally gives you the highest-quality listening
experience. However, you may get better FM signal reception by changing the
transmission to mono. The TuneFM transmits in stereo mode by default. We suggest
that you switch from stereo to mono transmission only if your car stereo is NOT
receiving a clear signal from the TuneFM, or if you are listening to mono recordings such
as audio books.
You can access the stereo/mono transmission menu by pressing
the “1” and “3” buttons simultaneously for two seconds. The
TuneFM then displays the current mode setting, which is
represented by “MONO” or “ST”.
You can change the mode by pressing the up or down arrows.
Either arrow will change between the two modes. The new
setting takes effect immediately.
To accept your mode selection, simply wait for the iPod screen to
return to the iPod Main Menu.
| 06