High Speed ADSL2+ Modem-Router High Speed ADSL2+ Modem-Router Connect your PC for high-speed Internet access Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd. 4 Pioneer Avenue Tuggerah Business Park Tuggerah NSW Australia 2259 +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B.V.
Table of Contents Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Make sure you have the following. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Internet Connection Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.
Make sure you have the following Introduction 1 Package Contents NAT IP Address Sharing SPI Firewall Your Modem-Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding.
Knowing Your Modem-Router Knowing Your Modem-Router The Modem-Router is designed to be placed on a desktop. All of the cables exit from the rear of the Modem-Router for better organization and utility. The LED indicators are easily visible on the front of the Modem-Router to provide you with information about network activity and status. 3. ADSL DATA LED The ADSL Data LED shows you when the Modem-Router is connected to the Internet. When the LED is OFF, the Modem-Router is NOT connected to the Internet.
Knowing your Modem-Router Connecting your Modem-Router Back Panel Connecting your Computer via Ethernet 1. Power off your computer and Modem-Router 2. Connect your computer to an Ethernet port on the rear of the Modem-Router by using an Ethernet networking cable (an Ethernet network cable is supplied). Power on your computer and Modem-Router. 5. ADSL This port is for connection to your ADSL line. Connect your ADSL line to this port. 6. Ethernet The Ethernet port is RJ45, 10/100 auto-negotiation.
Setting up your Computer Setting up your Computer In order for your computer to properly communicate with your ModemRouter, you will need to change your computer’s “TCP/IP Ethernet” settings to “Obtain an IP address automatically/Using DHCP”. This is normally the default setting in most home computers. Manually Configuring Network Adapters in Windows 98SE or Me Manually Configuring Network Adapters in Windows XP, 2000, or NT 2. Select “TCP/IP -> settings” for your installed network adapter.
Setting up your Computer Setting up your Computer Manually Configuring Network Adapters in Mac OS up to 9.x Recommended Web Browser Settings In order for your computer to properly communicate with your ModemRouter, you will need to change your Mac computer’s TCP/IP settings to DHCP. Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”. 2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet” in the “Connect via:” drop-down menu. 3.
Setting up your Computer Manually Configuring your Modem-Router Netscape Navigator 4.0 or Higher Understanding the Web-Based User Interface Start Netscape, click on “Edit” then “Preferences”. 2. In the “Preferences” window, click on “Advanced” then select “Proxies”. In the “Proxies” window, select “Direct connection to the Internet”. Mozilla FireFox 1.0 or Higher 1. Start FireFox, click on “Tools” then “Options” 2. In the “General” tab, click “Connection Settings” 3.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router Making Configuration Changes Advanced Setup Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been made on a page, most times you will need to click the “SAVE SETTINGS” or “NEXT” button at the bottom of the page to enable the new setting. Some options may also have an “ADD” button also. Clicking the Home icon returns you to the home page.
Manually Configuring your Modem-Router UPnP Configures the Modem-Router’s Universal Plug and Play features. DDNS Configures the Dynamic DNS function. Tools Contains options to back up and restore the current configuration, restore all configuration settings to the factory defaults, update system firmware, or reset the system. Status System Settings Time Settings Set the time zone and time server for the Modem-Router. This information is used for log entries and client access control.
Manually Configuring your Modem-Router unless you need to change it. After any changes are made you must click on “Save Settings” to apply them. Note: If you check “Enabled” and specify an IP address of 0.0.0.0, any host can manage the Modem-Router. For remote management via WAN IP address you need to connect using port 8080. Simply enter WAN IP address followed by :8080 in the address field of your web browser, for example, 123.123.123.123:8080.
Manually Configuring your Modem-Router ATM Interface Description Protocol • Disable: Disables the connection. • 1483 Bridging: Bridging is a standardized layer 2 technology. It is typically used in corporate networks to extend the physical reach of a single LAN segment and increase the number of stations on a LAN without compromising performance. Bridged data is encapsulated using the RFC1483 protocol to enable data transport.
Manually Configuring your Modem-Router VPI/VCI 1 Username Enter user name. Password Enter password Confirm password Confirm Password MTU Leave the Maximum Transmission Unit (MTU) at the default value (1500) unless you have a particular reason to change it. 2 3 5 Shows the packet encapsulation type. Packet encapsulation specifies how to handle multiple protocols at the ATM transport layer.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router LAN DHCP Client List Use the LAN (Local Area Network) menu to configure the LAN IP address and to enable the DHCP server for dynamic client address allocation. The DHCP Clients List displays the IP Address, Host Name and MAC Address of each client that has requested an IP address since the last reboot of the ModemRouter.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router Address Mapping Special Applications Use Address Mapping to allow a limited number of public IP addresses to be translated into multiple private IP addresses for use on the internal LAN network. This also hides the internal network for increased privacy and security. Some applications, such as Internet gaming, video conferencing, Internet telephony and others, require multiple connections.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router NAT Mapping Table Route NAT Mapping Table displays the current NAPT (Network Address Port Translation) address mappings. The NAT address mappings are listed 20 lines per page, click the control buttons to move forwards and backwards. As the NAT mapping is dynamic, a Refresh button is provided to refresh the NAT Mapping Table with the most up-to-date values.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router Click Add or Edit to display the following page and add a new static route to the list. RIP Parameter 1 The device supports Routing Information Protocol (RIP) v1 and v2 to dynamically exchange routing information with adjacent Modem-Routers. 2 3 4 5 Parameter Description Index Displays the number of the route. Network Address Enter the IP address of the remote computer for which to set a static route.
Manually Configuring your Modem-Router Authentication Required None: No authentication. Manually Configuring your Modem-Router 1 Routing Table 2 Password: A password authentication key is included in the packet. If this does not match what is expected, the packet will be discarded. This method provides very little security as it is possible to learn the authentication key by watching RIP packets.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router Firewall Access Control Add PC The Modem-Router’s firewall enables access control of client PCs, blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. The settings in the screen shot below will block all email sending and receiving.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router URL Blocking Edit Schedule Rule To configure the URL Blocking feature, use the table below to specify the web sites (www.somesite. com) and/or keywords you want to filter on your network. You can create and edit schedule rules on this page.
Manually Configuring your Modem-Router Stateful Packet Inspection The Modem-Router protects against DoS attacks including: Ping of Death (Ping flood) attack, SYN flood attack, IP fragment attack (Teardrop Attack), Brute-force attack, Land Attack, IP Spoofing attack, IP with zero length, TCP null scan (Port Scan Attack), UDP port loopback, Snork Attack. Note: The firewall does not significantly affect system performance, so we advise enabling the prevention features to protect your network.
Manually Configuring your Modem-Router RIP Defect Enabled If the Modem-Router does not reply to an IPX RIP request packet, it will stay in the input queue and not be released. Accumulated packets could cause the input queue to fill, causing severe problems for all protocols. Enabling this feature prevents the packets accumulating. Enter your email address. SMTP Server Address Enter your SMTP server address (usually the part of the email address following the “@” sign).
Manually Configuring your Modem-Router Maximum number of half-open fragmentation packets from the same host. 1 secs Flooding cracker block time 300 secs Length of time before a half-open fragmentation session is detected as half-open. Length of time from detecting a flood attack to blocking the attack. If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access.
Manually Configuring your Modem-Router Status Manually Configuring your Modem-Router 1 Noise Margin: The Status page displays ADSL status information. Upstream Minimum noise margin upstream. Downstream Minimum noise margin downstream. Maximum fluctuation in the output power Output Power Attenuation: Maximum reduction in the strength of the upstream signal. Downstream Maximum reduction in the strength of the downstream signal.
Manually Configuring your Modem-Router Statistics (Superframes represent the highest level of data presentation. Each superframe contains regular ADSL frames, one of which is used to provide superframe synchronization, identifying the start of a superframe. Some of the remaining frames are also used for special functions.) Number of interleaved superframes received. Transmitted Superframes Interleaved Number of interleaved superframes transmitted.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router DDNS Configuration Tools 2 Check Backup ModemRouter Configuration and click “NEXT” to save your Modem-Router’s configuration to a file named “backup.cfg” on your PC. With a DDNS connection you can host your own web site, email server, FTP site and more at your own location even if you have a dynamic IP Address. This Modem-Router supports both DynDNS (www.dyndns.org) and TZO (www.TZO.com) DDNS connections only.
Manually Configuring your Modem-Router Manually Configuring your Modem-Router Please note: If your Modem-Router is functioning correctly, we do not recommend you update the firmware. Belkin is not responsible for any consequence as result of a firmware update. Please consult Belkin Technical Support prior to updating the ModemRouter’s firmware. The following items are included on the Status screen: Download the file to your hard drive. Then click Browse... to find the file on your computer.
Manually Configuring your Modem-Router New Zealand Telepermit Special Conditions Security Log PTC General Warning The security log may be saved to a file by clicking “Save” and choosing a location. DHCP Client Log displays information on DHCP clients on your network. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.