Wi-Fi® Camera with Night Vision NETCAM User Manual F7D7601V2 • 8820ed01175uk Rev.
Table Of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . .
Getting Started Congratulations on buying a Belkin NetCam. This device will enable you to easily check in on your home and your loved ones when you are away. Initial Setup What’s in the Box Your wireless router, its network name (SSID), and password. NetCam An Android™ device (Version 2.2 or later) or an iPhone, iPad, or iPod touch (iOS Version 4.1 or later).
Getting Started Set Up Your Camera Wirelessly Through Your Mobile Devices 2. Switch the NetCam to Setup Mode by flipping up the switch on the back of the camera Please make sure the switch is in setup mode and the Wi-Fi light is blinking. 1.
Getting Started 3. Download the NetCam App from the App Store or Google Play 4. Set Up on iPhone, iPad, or iPod touch 4.1 Connect your mobile device to NetCam Wi-Fi signal Go to “Settings > Wi-Fi” on your iPhone/iPad/iPod touch and connect to the camera’s Wi-Fi signal.
Getting Started 4.2 Launch the NetCam App 4.3 Camera Setup Once your device establishes a connection with the camera, launch the NetCam App. You should see a pop-up message like the one below. Click “Yes” to set up your camera. Click “Continue” to begin setup.
Getting Started 4.4 Camera Preview 4.5 Connect to Internet The camera will show you a preview after successfully connecting to your device. Choose your Wi-Fi network to connect to the Internet. Click “Connect Camera to Internet.” You may also choose to connect to your network via Ethernet cable (not included) by clicking “Ethernet.
Getting Started 4.6 Connect to Internet Please wait for the camera to establish connection with the Internet. Enter your Wi-Fi password if you have a security-enabled network.
Getting Started 4.7 Create an Account 4.8 Use Existing Account If this is your first time setting up your camera, you will need to create an account. If you have an existing account, select “Use Existing” and then enter your account information. Click “Sign in.
Getting Started 4.9 Set Up Camera Info Click “Continue.” It will take a few seconds to register the camera with the server. Create the camera name and its description.
Getting Started 4.10 Setup Complete Congratulations ! Please flip the setup switch down on the back of the NetCam. Click “Finish” to complete the setup.
Getting Started 5. Set Up on Android Devices 5.2 Launch NetCam App! 5.1 Connect your device to NetCam Wi-Fi signal Once your device establishes a connection with the camera, launch the NetCam App. You should see a pop-up message like the one below. Click “Yes” to set up your camera. Go to “Settings > Wireless” and “Network > Wi-Fi settings” and connect to the camera Wi-Fi signal.
Getting Started 5.3 Camera Setup 5.4 Camera Preview Click “Continue” to begin setup. The camera will show you a preview after successfully connecting to your device. Click “Connect camera to Internet.
Getting Started 5.5 Connect to the Internet 5.6 Connect to Internet Choose your Wi-Fi network to connect to the Internet. Enter your Wi-Fi password if you have a security-enabled network. You may also choose to connect to your network via Ethernet cable (not included) by clicking “Ethernet.
Getting Started Please wait for the camera to establish an Internet connection. 5.7 Create an Account If this is your first time setting up your camera, you will need to create an account.
Getting Started 5.8 Use Existing Accounts 5.9 Set Up Camera Info If you have an existing account, select “Use Existing” and then enter your account information. Click “Sign in.” Create the camera name and its description.
Getting Started Click “Continue.” It will take a few seconds to register the camera with the server. 5.10 Setup Complete Please flip the setup switch down on the back of the NetCam. Click “Finish” to complete the setup.
Getting Started Congratulations! 16
Getting Started 1/8 in. or 5.5mm 2.5mm 6. Mounting Your Camera (optional) Unscrew camera post from the base and remove weight. Attach screws to wall and hang plate onto screws.
Getting Started Align base with plate and screw on camera post.
GETTING TO KNOW YOUR Wi-Fi CAMERA Front Panel A: Brightness sensor B: Camera sensor C: IR LED D: Microphone 19
GETTING TO KNOW YOUR Wi-Fi CAMERA B: Network Green: Connected to server Amber: Connected to local area network only Flashing Amber: Not connected to any network Flashing Green: Connected to network, ready to set up C: Power Green: Power On D: RJ45 port: Can be used for wired setup and for a wired connection with the router while using the NetCam. E: Camera holder You can adjust the NetCam’s position by adjusting the holder. F: Reset button Reset System: Press and hold for 1 second to reset the system.
Technical Details Software Features and Specifications Web App • L ive camera viewing • L ive audio on selected PC web browsers (Internet Explorer®, Firefox®, and Google Chrome™) • C amera settings • C amera firmware upgrade • D elete camera • I nvite friends to view your camera • E nable/disable email alert • U ser account management • C reate new user account • R eset password App on iOS or Android - Camera setup - Live camera viewing - Save snapshot and video from the live stream - Live one-
Technical Details Configure Camera Camera Configuration Name: Name of your camera Share/unshare: Make your camera public to your friends or not. Status: Change camera status to be online, offline, or private. Rotation: Select Normal or Flipped Vertically on the videos. IR: Select “Auto,” “On,” or “Off” of IR LEDs. Frame Rate: Up to 30fps Quality: 1-5 (Best = 5) Video Size: 160x120, 320x240, 640x480.
Technical Details Take a Snapshot Record Video Enable Microphone Camera Viewer 23
Technical Details Web Browser Protection Access this link via Internet Explorer, Netscape, Firefox, or Google Chrome: http://www.belkin.com/netcam To protect your security against a hacker, a popup message will alert you if someone else is logged into your account at the same time as you. Then you can view the camera via your PC.
Technical Details Hardware Features and Specifications Camera Image Sensor VGA 1/4 inch CMOS sensor Lens Focal length: 3.1mm, F2.6 View Angle Horizontal: 64° 8 IR LEDs, 850nm Adjust image size and quality Flip and mirror image Audio In Built-in microphone, -38 dB ± 2 dB Audio Compression G.711, PCM Always on Network Interface 10/100Base-TX Fast Ethernet 802.11b/g/n WLAN Auto mode Wireless Connectivity 802.
Technical Details General System Power Processor: RT5350 Input: 100-249V AC, 50/60Hz, Output: 5V DC, 1A Speed: 360MHz DRAM: 64MB Flash: 8MB Button Reset Button - R eset system: Press less than 1 second to reset the system - Factory default: Press and hold 20 seconds to restore the factory default settings Switch Setup mode switch: Turn setup mode on and off LEDs Setup Mode LED - S olid Green: Setup Mode on - A mber: In progress to switch to Setup Mode - N o light: Setup Mode off External AC-t
Technical Details System Requirements Resetting the Camera iPhone, iPad, or iPod touch with iOS 4.1 or above or Android smart devices Version 2.2 or above The “Reset” button is used in rare cases. In the unlikely event that your camera functions improperly, please use a pin to reset the camera. The Reset button is where the arrow below points. Reset the camera when the switch is in “OFF” mode. After the reset, the camera will resume to the default setting.
Troubleshooting, Support, and Warranty How can I share my cameras with my friends? If I buy more cameras, could I use the same username to connect them? Log in to your account. Under the camera configuration, find the “Sharing” icon. Type in your friends’ email addresses to invite them to see your camera. Unlimited cameras can be added under your own account, but each one should have a different camera name. The figure below shows that you can have different cameras under your account.
Troubleshooting, Support, and Warranty How can I upgrade the firmware? Can I change my username? Access your NetCam’s account from a web browser. Under the camera configuration, a screen will pop up like the one below. Click “Update Now.” It will take about 5~10 minutes to upgrade the new firmware. Your username is what identifies your account information, and once set, it cannot be changed. If you later do not like your username, the only recourse is to create a new account.
Troubleshooting, Support, and Warranty Belkin International, Inc., Limited 2-Year Product Warranty What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Troubleshooting, Support, and Warranty How to get service. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. To get service for your Belkin product you must take the following steps: Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser.
Troubleshooting, Support, and Warranty How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Troubleshooting, Support, and Warranty Technical Support US http://www.belkin.com/support UK http://www.belkin.com/uk/support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 1800 622 1130 Europe http://www.belkin.com/uk/support You can find technical-support information on our website, www.belkin.com, by navigating to the tech-support section.
Regulatory Information Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.
belkin.com © 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. iPad, iPhone, iPod touch, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.