USB VideoBus™ User Guide F5U207u F5U206 P72765
Belkin USB VideoBus™ User Guide I. Introduction FOR TECHNICAL SUPPORT ON THE MGI PHOTOSUITE OR VIDEOWAVE PROGRAMS, PLEASE CHECK MGI’S WEBSITE AT WWW.MGISOFT.COM Capture live video into your computer via the USB port! Thank you for purchasing the Belkin Components VideoBus™ Adapter.
12. In Win95 the setup program will then ask you to restart your computer, this is a necessary step. Win98 may not need restarting. Benefits and Features 13. You may then proceed to installing the MGI PhotoSuite SE and/or MGI VideoWave SE+ software packages included in the CD-ROM. • • • • • • • • • • Selectable USB bandwidth (0.5Mbps to 8.0Mbps in 0.
II. 1. VideoBus™ Installation 10. After you return to the installation, you will be prompted to finish the installation. Click Finish. Make sure to close all Windows programs before installing the Do not plug in the VideoBus™ until you are prompted by the software installation program. VideoBus™ software. 2. Open your CD-ROM drive and place the VideoBus™ CD on the tray. Close the drive by pressing the eject button. The following screen will come up automatically.
If you are not getting an acceptable signal, see below for more information. 4. Click on the Setup button in the WinZip Self-Extractor window. The WinZip Self-Extractor will then unzip the VideoBus™ installation files. 5. The Setup window recommends that you exit all Windows programs before running setup and installing the VideoBus™ software. You should have already done this in step #1. If any Windows® programs are still running, cancel out of the installation and close all Windows programs.
. The Choose Destination Location window automatically selects the directory where the VideoBus™ will be installed. This default is the recommended directory. Click Next. 7. The Select Program Folder window will automatically select the correct folder for the VideoBus™. This default is the recommended folder. Click Next. 8. After the setup program runs the installation, you will be asked to connect the VideoBus™ to a free USB port on your PC. Connect the VideoBus™ at this time and then click OK.
