User manual

2. Device/STB

This section is used to manually configure your remote control settings so

that your @TV can control your set-top box. We recommend that you use

the @TV setup software to configure your @TV box, but these tools are

available for expert users.

a. Device category

i. Remote codes are grouped into various categories based on

standard industry practices. This can be somewhat confusing as a

device category like “VCR” can also refer to a set-top box that is a

Digital Video Recorder (DVR). Use “Digital Video Disk” only if you

are attaching an @TV to a DVD player or other similar product.

b. Manufacturer

i. Once you’ve identified the device category, your set-

top box manufacturer should be found in this list.

c. Select by model

i. Manually select the model number here.

d. Select by code

i. If you happen to know your product’s IR code set,

this setting allows you to manually select it.

e. Command duration

i. This setting allows you to adjust the speed at which the @

TV sends IR commands to your set-top box. For instance,

if you are trying to switch to channel 425 and continue to

arrive at channel 42, then channel 5, you should experiment

with shortening the duration of remote commands.

ConneCting to your Cable or satellite set-top box

f. Show all commands/test

i. This button allows you to test remote commands to

make sure that you have the proper settings in place. We

recommend that you select the “Show all commands” box and

test multiple commands to ensure your setup is perfect.