User manual

6
3. IR-Learning
In this section you can help your @TV “learn” remote commands. This
is particularly useful if you have a cable or satellite box not currently
supported by @TV. The steps are as follows:
a. Select the appropriate device you are trying to
control from the “Command Mapping” list.
b. From the list below, select the command that you
are trying to capture and then click “Learn.”
c. Follow the onscreen instructions and repeat until
you capture all of the remote commands you will
need to control your cable or satellite box.
d. When you are done, click “Save.”
ConneCting to your Cable or satellite set-top box