Switch User Manual

Software Installation (continued)

Windows

should copy all the files it needs and install the

Multi-port Hub completely. Windows will start installing the USB

COM ports as COM_A and COM_B on your computer, where A

and B are unused COM ports (A and B can be any number from

2 to 10). It will also finish installing the Parallel Port. You can

verify whether all the ports on the Multi-port Hub are installed

by looking in your “Device Manager”. To go to “Device

Manager” click on Start, select Settings, then click on Control

Panel. Look for the “System” icon then double click it. On the

Applet that appears select the “Device Manager” tab. Once

you are on “Device Manager”, click on the “Plus” sign

on the left side of “Universal Serial Bus Controller”; this will

expand it. Under “Universal Serial Bus Controller” you should

see the following:

a) Belkin USB Printer Adapter V2.03 (LPTUSB1)

b) Generic USB Hub

c) USB to Serial Converter

d) USB to Serial Converter