Instructions / Assembly

ManualsBrandsBelknap Hill Trading Post ManualsLumber & CompositesMaple Laminated Knock Down Desk

KDDesk.ai

Step 1

Step 2

THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR USE OF THE

PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE CONSTRUCTION OR USE OF THIS

PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING

THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR

IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.

UFP Riverside, LLC

2100 Avalon St. | Riverside, CA, 92509 | 951.826.3000

7687 9/14

www.BelknapHill.com

KNOCK-DOWN DESK

ASSEMBLY INSTRUCTIONS

Contents

• 2 Leg supports

• 1 Center support

• 1 Desktop

Completely insert the groove of center support into the

groove of a leg support. Repeat this step for the other

leg support.

Lay the desktop on the supports so that the desktop

grooves ﬁt securely on the tabs of the leg supports.

Step 1

Step 2

The knock-down desk uses grooves in the desk

supports and desktop for quick assembly and disas-

sembly. When assembling, make sure the pieces have

been completely inserted into the appropriate groove.

Summary of content (2 pages)

PAGE 1
KNOCK-DOWN DESK ASSEMBLY INSTRUCTIONS Contents • 2 Leg supports • 1 Center support • 1 Desktop The knock-down desk uses grooves in the desk supports and desktop for quick assembly and disassembly. When assembling, make sure the pieces have been completely inserted into the appropriate groove. Step 1 Completely insert the groove of center support into the groove of a leg support. Repeat this step for the other leg support.
PAGE 2
ESCRITORIO DESARMABLE INSTRUCCIONES DE ARMADO Contenido • 2 Soportes para patas • 1 Soporte central • 1 Cubierta de mesa El escritorio desarmable utiliza ranuras en los soportes y en la cubierta del escritorio para su rápido armado y desarmado. Al armar, asegúrese de que las piezas estén insertadas por completo en la ranura adecuada. Paso 1 Inserte completamente la ranura del soporte central en la ranura de uno de los soportes de pata. Repita este paso para el otro soporte de pata.