Submittal Sheet
A-600A
Model EAS
Enhanced Air Separator
REMOVES ENTRAINED AIR
• Increases heat transfer and comfort
• Reduces noise in the system
SUPREME FIRST PASS EFFICIENCY
• Removes over 99% of air, including micro-bubbles
PREVENTS CALL BACKS
HIGH FLOW RATES
• Up to 55% more than the competition
FOUR SIZES AVAILABLE
• For residential and commercial applications
EASY TO INSTALL
• No minimum pipe run required
• Straight or angle installation
• Compatible with diaphragm
or compression tanks
REMOVABLE 3/4” HIGH CAPACITY AIR VENT
DESIGNED & MANUFACTURED IN THE U.S.A.
FOR AMERICAN HEATING SYSTEMS
HOW IT WORKS:
1. As system uid enters through
the inlet, (either straight or angle)
the diffuser distributes ow evenly
across the stainless steel, wire
brushlike medium.
2. Air bubbles, even micro air bubbles,
stick to the brush laments.
3. Trapped air rises above the
diffuser, through a bafe
(not pictured), where the
air is then released through
an opening on top.
4. Deaerated water then goes
back into the system.