Submittal Sheet

Bell & Gossett
SUBMITTAL
A-333B
JOB: REPRESENTATIVE:
UNIT TAG: ORDER NO. DATE:
ENGINEER: SUBMITTED BY: DATE:
CONTRACTOR:
APPROVED BY:
DATE:
SCHEDULE
Enhanced Air Separator
Model EASB-JR
DESCRIPTION
The Bell & Gossett Model EASB-
JR Enhanced Air Separator
automatically removes entrained air bubbles in hydronic systems.
As fluid enters the EASB-
JR, the velocity is slowed down creating a
low pressure area. The small bubbles are then released from the
fluid and collect on the coalescing medium. As the bubbles
coalesce, they will rise on the top of the air separator where they
can be released to atmosphere through the built-
in automatic air
vent. The air separator has a bottom 1/2" NPT connection to
accommodate a B&G diaphragm expansion tank. The compact
design and brass body construction make the EASB-
JR ideal for
residential and commercial hydronic and heating systems.
Available Sizes:3/4", 1", 1-1/4", 1-
1/2" & 2" NPT or
3/4", 1", 1-1/4" Sweat
CONSTRUCTION
Cast Body and Cap: Brass
Coalescing Medium: Stainless Steel
Venting Mechanism: Non-Ferrous
MAXIMUM OPERATING LIMITATIONS
Temperature: 250ºF (121ºC)
Working Pressure: 150 psi (10 Bar)
MODEL
NUMBER
PART
NUMBER
SIZE
INCHES
RECOMMENDED
MAXIMUM
FLOW (GPM)
TAGGING
INFORMATION QUANTITY
EASB-3/4 JR 112111 3/4" NPT 6
EASB-3/4S JR 112114 3/4" Sweat 6
EASB-1 JR 112112 1" NPT 12
EASB-1S JR 112115 1" Sweat 12
EASB-1-1/4 JR 112113 1-1/4" NPT 20
EASB-1-1/4S JR 112116 1-1/4" Sweat 20
EASB-1-1/2 JR 112117 1-1/2" NPT 30
EASB-2 JR 112464 2" NPT 45
Bell & Gossett
© COPYRIGHT 2006 ITT CORPORATION